A Simplified Physical Model for the Sensitivity–Pressure Relationship in Textile-Based Piezoresistive Sensors
Sensors · 13.05.2026 · 26 (10) · 3081
DOI: 10.3390/s26103081 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 13.05.2026. Verfasst von Kai Shi und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Physics, Donghua University, Shanghai 201620, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China.
Abstract (Originalsprache)
Textile-based flexible pressure sensors have attracted considerable attention in wearable sensing applications due to their good comfort and mechanical compatibility. However, their sensitivity usually exhibits a nonlinear dependence on pressure, while a compact analytical framework with interpretable physical parameters is still lacking. In this work, a simplified physical model based on lumped effective parameters was established based on the evolution of fiber–conductive particle contacts, and an expression describing the sensitivity–pressure relationship was derived. The model indicates that the sensitivity is mainly governed by an electrical parameter α and a mechanical parameter ratio Eb/Ex, and captures the dominant nonlinear decrease in sensitivity with increasing pressure. To verify the applicability of the model, the effects of conductive particle loading, filler type, surface treatment, sensing-layer area, weave structure, and layer number on the sensor response were systematically investigated. In addition, comparison between model-based calculation and experiment in the low- and medium-pressure range gave RMSE values of 0.0040 and 0.0056, and MRE values of 27.6% and 13.4% for the single-layer and four-layer structures, respectively. These results show that the proposed framework captures the main trends of the sensitivity–pressure behavior and provides a physically interpretable basis for discussing how structural and material factors regulate sensor response. This work offers a useful framework for understanding the structure–property relationship of textile-based piezoresistive pressure sensors and may provide preliminary guidance for the design of customized sensors in wearable healthcare and soft robotics applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Physics, Donghua University, Shanghai 201620, China.
- College of Textiles, Donghua University, Shanghai 201620, China.
- State Key Laboratory of Surface Physics, Fudan University, Shanghai 200438, China.
- International Institute for Intelligent Nanorobots and Nanosystems, College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai 200438, China.
- Zhejiang Key Laboratoy of Extreme Environment Functional Materials, Yiwu Research Institute of Fudan University, Yiwu 322099, China.
Förderung
- the National Natural Science Foundation of China
Zitieren
APA
Shi, K., Tao, Y., Xu, X., Xiong, Z., Shi, J., & Guo, Y. (2026). A Simplified Physical Model for the Sensitivity–Pressure Relationship in Textile-Based Piezoresistive Sensors. Sensors, 26(10), 3081. https://doi.org/10.3390/s26103081
Vancouver
Shi K, Tao Y, Xu X, Xiong Z, Shi J, Guo Y. A Simplified Physical Model for the Sensitivity–Pressure Relationship in Textile-Based Piezoresistive Sensors. Sensors. 2026;26(10):3081. doi:10.3390/s26103081
BibTeX
@article{Shi2026,
author = {Shi, Kai and Tao, Yanan and Xu, Xuechun and Xiong, Zhehao and Shi, Jianjun and Guo, Ying},
title = {A Simplified Physical Model for the Sensitivity–Pressure Relationship in Textile-Based Piezoresistive Sensors},
journal = {Sensors},
year = {2026},
volume = {26},
number = {10},
pages = {3081},
doi = {10.3390/s26103081}
}
EUVIMED