EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

C-Axis Oriented LiNbO3 Thin Film Grown by Chemical Beam Epitaxy for Surface Acoustic Wave Device Applications

Nikolay Smagin iD, Thanh Ngoc Kim Bui iD, Zakariae Oumekloul, Rahma Moalla, William Maudez iD, Estelle Wagner iD, Marc Duquennoy, Rayen Kalai Mathlouthi, Yves Deblock, Hatem Dahmani, Denis Remiens, Julien Carlier und 1 weitere

Sensors · 02.05.2026 · 26 (9) · 2858

DOI: 10.3390/s26092858 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 02.05.2026. Verfasst von Nikolay Smagin und 12 weiteren Autor:innen. Beteiligte Einrichtung: Institut d'Électronique de Microélectronique et de Nanotechnologie (IEMN), UMR CNRS 8520, Université Polytechnique Hauts-de-France, CNRS, Université …. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, European Union with the European Regional Development Fund, French RENATECH.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-frequency surface acoustic wave (SAW) devices require piezoelectric thin films combining strong electromechanical coupling, high acoustic velocity, and compatibility with scalable fabrication. Lithium niobate (LiNbO3) is a promising material, but the growth of high-quality thin films remains challenging because of lithium volatility and process-control issues. In this work, chemical beam epitaxy (CBE) was investigated as an alternative route for the deposition of c-axis-oriented LiNbO3 thin films on C-plane sapphire at a relatively low growth temperature of 400 °C. Structural characterization confirmed high crystalline quality, with clear (006) and (0012) XRD reflections and a rocking-curve full width at half maximum of 0.04°. To evaluate acoustic performance, a SAW delay line and a one-port resonator were fabricated on 350 nm thick films using e-beam lithography. The devices operated in the 1–3 GHz range and exhibited electromechanical coupling factors of about 0.3% for the Rayleigh mode at 1.7 GHz and 3% for the Sezawa mode at 2.75 GHz. Propagation velocities ranged from 5094 to 8250 m/s, and the Rayleigh-mode resonator quality factor reached about 500. These results demonstrate the feasibility of CBE-grown LiNbO3 films for SAW device applications.

Schlagwörter

Stichwörter der Autor:innen

SAWchemical beam epitaxyelectromechanical couplinglithium niobatethin film

Autor:innen und Institutionen

  • Institut d'Électronique de Microélectronique et de Nanotechnologie (IEMN), UMR CNRS 8520, Université Polytechnique Hauts-de-France, CNRS, Université de Lille, 59313 Valenciennes, France.
  • 3D-Oxides, 41 Rue Henri Fabre, 01630 Saint-Genis-Pouilly, France.
  • Institut des Nanotechnologies de Lyon (INL), Université de Lyon, Ecole Centrale de Lyon, CNRS, UMR5270, 69134 Ecully, France.

ORCID-Profile: Nikolay Smagin, Thanh Ngoc Kim Bui, William Maudez, Estelle Wagner, Giacomo Benvenuti

Förderung

  • Agence Nationale de la Recherche
  • European Union with the European Regional Development Fund
  • French RENATECH

Zitieren

APA

Smagin, N., Bui, T. N. K., Oumekloul, Z., Moalla, R., Maudez, W., Wagner, E., Duquennoy, M., Mathlouthi, R. K., Deblock, Y., Dahmani, H., Remiens, D., Carlier, J., & Benvenuti, G. (2026). C-Axis Oriented LiNbO3 Thin Film Grown by Chemical Beam Epitaxy for Surface Acoustic Wave Device Applications. Sensors, 26(9), 2858. https://doi.org/10.3390/s26092858

Vancouver

Smagin N, Bui TNK, Oumekloul Z, Moalla R, Maudez W, Wagner E, et al. C-Axis Oriented LiNbO3 Thin Film Grown by Chemical Beam Epitaxy for Surface Acoustic Wave Device Applications. Sensors. 2026;26(9):2858. doi:10.3390/s26092858

BibTeX
@article{Smagin2026,
  author = {Smagin, Nikolay and Bui, Thanh Ngoc Kim and Oumekloul, Zakariae and Moalla, Rahma and Maudez, William and Wagner, Estelle and Duquennoy, Marc and Mathlouthi, Rayen Kalai and Deblock, Yves and Dahmani, Hatem and Remiens, Denis and Carlier, Julien and Benvenuti, Giacomo},
  title = {C-Axis Oriented LiNbO3 Thin Film Grown by Chemical Beam Epitaxy for Surface Acoustic Wave Device Applications},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {9},
  pages = {2858},
  doi = {10.3390/s26092858}
}
Kostenlos starten →