Controlling BCC‐FCC Phase Selection in Cantor Thin Films Grown by Molecular Beam Epitaxy
Advanced Materials · 2026-11 · 38 (63)
DOI: 10.1002/adma.75307 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 09.10.2026. Verfasst von Vincent Boucher und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institut Jean Lamour (UMR7198), Université de Lorraine, CNRS, Nancy, France. Die Arbeit nennt 45 Literaturangaben. Gefördert von: French 2030 program, French National Research Agency, Agence Nationale de la Recherche.
Abstract (Originalsprache)
High entropy alloys (HEAs) constitute a new class of materials with promising physicochemical properties which remain largely unexplored experimentally. The overall objective of this study is to prepare single‐crystalline Cantor films (CrMnFeCoNi) grown by Molecular Beam Epitaxy. Film growth was monitored in real time via electron diffraction, while their structure and morphology were characterized using x‐ray diffraction and transmission electron microscopy. The use of metallic buffer layers such as Ni, Rh, or RhNi 2 enabled the growth of epitaxial Cantor alloy layers with an FCC structure, consistent with existing literature. Surprisingly, the use of Fe, Cr, or Pd buffer layers resulted in the formation of Cantor alloy films with a BCC structure—a phase never previously reported. This phase is also obtained by depositing the Cantor by magnetron sputtering on a Cr buffer layer. Using ab initio calculations, we demonstrate that the selection of the FCC or BCC phases is governed by the commensurability with buffer layer thanks to strong adsorption energies. Finally, structural relaxation during calculations yields the same energy gain for both structures. Unlike FCC films, this BCC Cantor phase is observed to be ferromagnetic with a moment around 1000 kA/m at 300K, confirming reported ab initio calculations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institut Jean Lamour (UMR7198), Université de Lorraine, CNRS, Nancy, France.
- Department of Physics, University of Central Florida, Orlando, Florida, USA.
ORCID-Profile: Vincent Boucher, Salah-Eddine Benrazzouq, Abdelkader Kara, Gwladys Steciuk, Pascal Boulet, Jean-François Pierson, Vincent Fournée, Julian Ledieu, Stéphane Andrieu
Förderung
- French 2030 program
- French National Research Agency
- Agence Nationale de la Recherche
Zitieren
APA
Boucher, V., Benrazzouq, S. E., Kara, A., Steciuk, G., Boulet, P., Suire, S., Pierson, J. F., Fournée, V., Ledieu, J., & Andrieu, S. (2026). Controlling BCC‐FCC Phase Selection in Cantor Thin Films Grown by Molecular Beam Epitaxy. Advanced Materials, 38(63). https://doi.org/10.1002/adma.75307
Vancouver
Boucher V, Benrazzouq SE, Kara A, Steciuk G, Boulet P, Suire S, et al. Controlling BCC‐FCC Phase Selection in Cantor Thin Films Grown by Molecular Beam Epitaxy. Advanced Materials. 2026;38(63). doi:10.1002/adma.75307
BibTeX
@article{Boucher2026,
author = {Boucher, Vincent and Benrazzouq, Salah-Eddine and Kara, Abdelkader and Steciuk, Gwladys and Boulet, Pascal and Suire, Stéphane and Pierson, Jean-François and Fournée, Vincent and Ledieu, Julian and Andrieu, Stéphane},
title = {Controlling BCC‐FCC Phase Selection in Cantor Thin Films Grown by Molecular Beam Epitaxy},
journal = {Advanced Materials},
year = {2026},
volume = {38},
number = {63},
doi = {10.1002/adma.75307}
}
EUVIMED