Functional Nanomaterials and Nanocomposites for High-Performance Printed Biosensors
Sensors · 24.04.2026 · 26 (9) · 2646
DOI: 10.3390/s26092646 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 24.04.2026. Verfasst von Minwoo Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical and Digital Engineering, College of Engineering, Hanyang University, Seoul 04763, Republic of Korea. Hauptthemen laut MEDLINE: Biosensing Techniques, Nanocomposites, Printing, Nanostructures. Die Arbeit nennt 193 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of SMEs and Startups.
Abstract (Originalsprache)
Printed biosensors have attracted increasing attention as platforms for rapid, low-cost, and portable diagnostics because they can be fabricated on flexible or rigid substrates using scalable printing techniques. Their performance is strongly influenced by both the printing process and the materials employed, since factors such as ink rheology, particle dispersion, interfacial behavior, and post-processing conditions directly affect device architecture, sensing performance, and manufacturing reliability. This review summarizes recent advances in printed biosensors from the combined perspectives of printing technologies and functional materials. Commonly employed printing techniques, including inkjet, screen, aerosol jet, and roll-to-roll gravure printing, are discussed with emphasis on their processing characteristics and material requirements. The review also examines key material platforms used in printed biosensors, including carbon-based nanomaterials, metal oxides, metal nanoparticles, conductive polymers, dielectric materials, and hybrid composites, highlighting their roles in electrical conductivity, catalytic activity, biomolecule immobilization, mechanical flexibility, and overall analytical performance. Finally, current challenges and emerging research directions are outlined with respect to ink stability, post-processing strategies, sensor reliability, manufacturability, and practical translation. Overall, this review emphasizes that the development of high-performance printed biosensors depends on the synergistic integration of rational material design with optimized printing strategies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Medical and Digital Engineering, College of Engineering, Hanyang University, Seoul 04763, Republic of Korea.
- Department of Biomedical Engineering, College of Engineering, Hanyang University, Seoul 04763, Republic of Korea.
- Department of Pharmacology, College of Medicine, Hanyang University, Seoul 04763, Republic of Korea.
ORCID-Profile: Minwoo Kim, Yongwoo Jang
Förderung
- National Research Foundation of Korea
- Ministry of SMEs and Startups
Zitieren
APA
Kim, M., Shin, J., Yoon, S., & Jang, Y. (2026). Functional Nanomaterials and Nanocomposites for High-Performance Printed Biosensors. Sensors, 26(9), 2646. https://doi.org/10.3390/s26092646
Vancouver
Kim M, Shin J, Yoon S, Jang Y. Functional Nanomaterials and Nanocomposites for High-Performance Printed Biosensors. Sensors. 2026;26(9):2646. doi:10.3390/s26092646
BibTeX
@article{Kim2026,
author = {Kim, Minwoo and Shin, Jeongho and Yoon, Seeun and Jang, Yongwoo},
title = {Functional Nanomaterials and Nanocomposites for High-Performance Printed Biosensors},
journal = {Sensors},
year = {2026},
volume = {26},
number = {9},
pages = {2646},
doi = {10.3390/s26092646}
}
EUVIMED