PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates
Sensors · 2026-04-05 · 26 (7) · 2246
DOI: 10.3390/s26072246 ↗At a glance
Journal article in Sensors, published online on 2026-04-05. Written by Kae Nakamura and 5 co-authors. Institution: Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802, USA. Cited 1 times so far (Crossref); 44 references. The full text is freely available (open access, CC BY 4.0). Funded by: Department of Materials Science and Engineering, The Pennsylvania State University, National Science Foundation, as part of the Center for Dielectrics and Piezoelectrics, The Pennsylvania State University.
Abstract (original language)
A bottom-up fabrication approach for flexible piezoelectric micromachined ultrasound transducer (PMUT) arrays on stainless-steel substrates was developed. Devices were fabricated using chemical solution deposition of a 700 nm-thick layer of Pb0.99□0.01(Zr0.52Ti0.48)Nb0.02O3, where □ denotes a vacancy on the Pb site, on 50 μm-thick LaNiO3/HfO2/stainless-steel foils. Lithography for definition of the electrode and piezoelectric layers was completed on the front of the wafer. Ni electroplating on the back side of the foil was used to create locally stiff areas to define the deflection area. PMUT devices were successfully fabricated using this method. The permittivity and loss tangent of the fabricated device at 1 kHz were 283 ± 9 and
Subjects
Author keywords
Authors and institutions
- Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802, USA.
- Materials Research Institute, The Pennsylvania State University, University Park, PA 16802, USA.
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA.
- School of Electrical Engineering and Computer Science, The Pennsylvania State University, University Park, PA 16802, USA.
ORCID profiles: Kae Nakamura, Chi-Luen Huang, Ali Habib Akhyari, Andrea P Argüelles, Susan Trolier-McKinstry
Funding
- Department of Materials Science and Engineering, The Pennsylvania State University
- National Science Foundation, as part of the Center for Dielectrics and Piezoelectrics
- The Pennsylvania State University
- National Science Foundation
Cite
APA
Nakamura, K., Huang, C. L., Habib Akhyari, A., Argüelles, A. P., Jackson, T. N., & Trolier-McKinstry, S. (2026). PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates. Sensors, 26(7), 2246. https://doi.org/10.3390/s26072246
Vancouver
Nakamura K, Huang CL, Habib Akhyari A, Argüelles AP, Jackson TN, Trolier-McKinstry S. PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates. Sensors. 2026;26(7):2246. doi:10.3390/s26072246
BibTeX
@article{Nakamura2026,
author = {Nakamura, Kae and Huang, Chi-Luen and Habib Akhyari, Ali and Argüelles, Andrea P and Jackson, Thomas N and Trolier-McKinstry, Susan},
title = {PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates},
journal = {Sensors},
year = {2026},
volume = {26},
number = {7},
pages = {2246},
doi = {10.3390/s26072246}
}
EUVIMED