EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates

Kae Nakamura iD, Chi-Luen Huang iD, Ali Habib Akhyari iD, Andrea P Argüelles iD, Thomas N Jackson, Susan Trolier-McKinstry iD

Sensors · 05.04.2026 · 26 (7) · 2246

DOI: 10.3390/s26072246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 05.04.2026. Verfasst von Kae Nakamura und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Materials Science and Engineering, The Pennsylvania State University, National Science Foundation, as part of the Center for Dielectrics and Piezoelectrics, The Pennsylvania State University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A bottom-up fabrication approach for flexible piezoelectric micromachined ultrasound transducer (PMUT) arrays on stainless-steel substrates was developed. Devices were fabricated using chemical solution deposition of a 700 nm-thick layer of Pb0.99□0.01(Zr0.52Ti0.48)Nb0.02O3, where □ denotes a vacancy on the Pb site, on 50 μm-thick LaNiO3/HfO2/stainless-steel foils. Lithography for definition of the electrode and piezoelectric layers was completed on the front of the wafer. Ni electroplating on the back side of the foil was used to create locally stiff areas to define the deflection area. PMUT devices were successfully fabricated using this method. The permittivity and loss tangent of the fabricated device at 1 kHz were 283 ± 9 and

Schlagwörter

Stichwörter der Autor:innen

PMUTPZTflexible MEMSmetal foil

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802, USA.
  • Materials Research Institute, The Pennsylvania State University, University Park, PA 16802, USA.
  • Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA.
  • School of Electrical Engineering and Computer Science, The Pennsylvania State University, University Park, PA 16802, USA.

ORCID-Profile: Kae Nakamura, Chi-Luen Huang, Ali Habib Akhyari, Andrea P Argüelles, Susan Trolier-McKinstry

Förderung

  • Department of Materials Science and Engineering, The Pennsylvania State University
  • National Science Foundation, as part of the Center for Dielectrics and Piezoelectrics
  • The Pennsylvania State University
  • National Science Foundation

Zitieren

APA

Nakamura, K., Huang, C. L., Habib Akhyari, A., Argüelles, A. P., Jackson, T. N., & Trolier-McKinstry, S. (2026). PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates. Sensors, 26(7), 2246. https://doi.org/10.3390/s26072246

Vancouver

Nakamura K, Huang CL, Habib Akhyari A, Argüelles AP, Jackson TN, Trolier-McKinstry S. PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates. Sensors. 2026;26(7):2246. doi:10.3390/s26072246

BibTeX
@article{Nakamura2026,
  author = {Nakamura, Kae and Huang, Chi-Luen and Habib Akhyari, Ali and Argüelles, Andrea P and Jackson, Thomas N and Trolier-McKinstry, Susan},
  title = {PiezoMEMS Fabrication on Flexible Stainless-Steel Substrates},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {7},
  pages = {2246},
  doi = {10.3390/s26072246}
}
Kostenlos starten →