EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integration of Conventional Sensors and Laser Doppler Vibrometry for Structural Modal Analysis: An Innovative Approach

Eva Martínez López, Natalia García-Fernández iD, F Pelayo iD, Marta García Diéguez iD, Manuel Aenlle iD

Sensors · 08.01.2026 · 26 (2) · 418

DOI: 10.3390/s26020418 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 08.01.2026. Verfasst von Eva Martínez López und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Construction and Manufacturing Engineering, University of Oviedo, 33203 Gijón, Spain. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Institute of Industrial Technology of Asturias (IUTA), Spanish State Research Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to demonstrate the feasibility of a hybrid measurement system that combines Laser Doppler Vibrometry (LDV) and conventional accelerometers for operational modal analysis (OMA) of civil engineering structures. The proposed approach addresses the limitations of traditional accelerometer-based systems, particularly for large-scale or inaccessible structures, by integrating non-contact LDV measurements with conventional sensor data. Experimental tests were conducted on a cantilever beam and a pedestrian laboratory footbridge to validate the hybrid system. The LDV was used to measure velocity at key points, while accelerometers provided complementary reference acceleration measurements. Reflective targets were employed to facilitate non-contact data collection, allowing for the subsequent reuse of these targets for repeated measurements. The velocity data from the LDV were differentiated to obtain acceleration and integrated to estimate displacement, enabling a direct combination with accelerometer data. ARTeMIS Modal software was utilized to process and analyze the collected data, successfully identifying the natural frequencies and vibration modes of both structures. The results demonstrate that the LDV–accelerometer hybrid system effectively captures the dynamic behavior of structures, offering a comprehensive solution for modal analysis without extensive sensor deployment. This approach provides significant advantages in scenarios where traditional methods are impractical, positioning the hybrid system as a promising tool for dynamic analysis and infrastructure monitoring of complex structures.

Schlagwörter

Stichwörter der Autor:innen

Laser Doppler VibrometryOMAnon-contact measurementsstructural health monitoring (SHM)

Autor:innen und Institutionen

  • Department of Construction and Manufacturing Engineering, University of Oviedo, 33203 Gijón, Spain.

ORCID-Profile: Natalia García-Fernández, F Pelayo, Marta García Diéguez, Manuel Aenlle

Förderung

  • University Institute of Industrial Technology of Asturias (IUTA)
  • Spanish State Research Agency

Zitieren

APA

Martínez López, E., García-Fernández, N., Pelayo, F., García Diéguez, M., & Aenlle, M. (2026). Integration of Conventional Sensors and Laser Doppler Vibrometry for Structural Modal Analysis: An Innovative Approach. Sensors, 26(2), 418. https://doi.org/10.3390/s26020418

Vancouver

Martínez López E, García-Fernández N, Pelayo F, García Diéguez M, Aenlle M. Integration of Conventional Sensors and Laser Doppler Vibrometry for Structural Modal Analysis: An Innovative Approach. Sensors. 2026;26(2):418. doi:10.3390/s26020418

BibTeX
@article{MartnezLpez2026,
  author = {Martínez López, Eva and García-Fernández, Natalia and Pelayo, F and García Diéguez, Marta and Aenlle, Manuel},
  title = {Integration of Conventional Sensors and Laser Doppler Vibrometry for Structural Modal Analysis: An Innovative Approach},
  journal = {Sensors},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {418},
  doi = {10.3390/s26020418}
}
Kostenlos starten →