Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry
Sensors · 25.05.2024 · 24 (11) · 3413
DOI: 10.3390/s24113413 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 25.05.2024. Verfasst von Cuihong Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Aeronautic Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Jiangsu Higher Education Institutions of China, the Start-up Fund for New Talented Researchers of Nanjing Vocational University of Industry Technology, High-level Training Project for Professional-leader Teachers of Higher Vocational Colleges in Jiangsu Province.
Abstract (Originalsprache)
The continuous scanning laser Doppler vibrometry (CSLDV) technique is usually used to evaluate the vibration operational deflection shapes (ODSs) of structures with continuous surfaces. In this paper, an extended CSLDV is demonstrated to measure the non-continuous surface of the bladed disk and to obtain the ODS efficiently. For a bladed disk, the blades are uniformly distributed on a given disk. Although the ODS of each blade can be derived from its response data along the scanning path with CSLDV, the relative vibration direction between different blades cannot be determined from those data. Therefore, it is difficult to reconstruct the complete vibration mode of the whole blade disk. In order to measure the complete ODS of the bladed disk, a method based on ODS frequency response functions (ODS FRFs) has been proposed. While the ODS of each blade is measured by designing the suitable scanning paths in CSLDV, an additional response signal is obtained at a fixed point as the reference signal to identify the relative vibration phase between the blade and the blade of the bladed disk. Finally, a measurement is performed with a simple bladed disk and the results demonstrate the feasibility and effectiveness of the proposed extended CSLDV method.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aeronautic Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China.
- Aeronautic Intelligent Manufacturing and Digital Health Management Technology Engineering Research Center of Jiangsu Province, Nanjing 210023, China.
ORCID-Profile: Cuihong Liu
Förderung
- the Natural Science Foundation of Jiangsu Higher Education Institutions of China
- the Start-up Fund for New Talented Researchers of Nanjing Vocational University of Industry Technology
- High-level Training Project for Professional-leader Teachers of Higher Vocational Colleges in Jiangsu Province
- Natural Science Foundation of Jiangsu Province
- Qing Lan Project for Excellent Young Core Teachers of Jiangsu Province
Zitieren
APA
Liu, C., Xu, T., Chen, T., Su, S., Huang, J., & Li, Y. (2024). Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry. Sensors, 24(11), 3413. https://doi.org/10.3390/s24113413
Vancouver
Liu C, Xu T, Chen T, Su S, Huang J, Li Y. Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry. Sensors. 2024;24(11):3413. doi:10.3390/s24113413
BibTeX
@article{Liu2024,
author = {Liu, Cuihong and Xu, Tengzhou and Chen, Tao and Su, Shi and Huang, Jie and Li, Yijin},
title = {Operational Deflection Shape Measurements on Bladed Disks with Continuous Scanning Laser Doppler Vibrometry},
journal = {Sensors},
year = {2024},
volume = {24},
number = {11},
pages = {3413},
doi = {10.3390/s24113413}
}
EUVIMED