Wearable IoT-Enabled Galvanic Skin Response Device for Objective Pain and Stress Monitoring: Hardware Design and Prototype Development
Sensors · 2025
DOI: 10.3390/s26010116 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Anushka N Phadke und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Virginia Commonwealth University, Richmond, VA 23298, USA. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Galvanic Skin Response, Internet of Things, Pain. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Accurate pain and stress assessment remains a challenge in patients with limited communication ability. Current galvanic skin response (GSR) devices lack real-time feedback, wireless communication, and robustness against motion artifacts, limiting their clinical utility. This paper presents the design and development of a wearable internet-of-things (IoT) enabled GSR system incorporating Bluetooth Low Energy (BLE) communication, ergonomic mechanical housing, and artifact-filtering through a custom API. The system integrates finger-mounted electrodes, a custom amplifier and signal processor, an nRF52840 BLE microcontroller, and a rechargeable Li-ion battery in a compact 3D-printed wrist-mounted enclosure. Basic validation with two healthy subjects demonstrated reliable detection of stress-induced GSR fluctuations with reduced movement artifacts. Results indicate the feasibility of the proposed design as a low-cost, wireless, and ergonomic solution for objective pain and stress monitoring.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Virginia Commonwealth University, Richmond, VA 23298, USA.
- Department of Information Systems, J. Sargeant Reynolds Community College, Richmond, VA 23228, USA.
ORCID-Profile: Satinder Gill
Zitieren
APA
Phadke, A. N., Harasheh, K., & Gill, S. (2025). Wearable IoT-Enabled Galvanic Skin Response Device for Objective Pain and Stress Monitoring: Hardware Design and Prototype Development. Sensors. https://doi.org/10.3390/s26010116
Vancouver
Phadke AN, Harasheh K, Gill S. Wearable IoT-Enabled Galvanic Skin Response Device for Objective Pain and Stress Monitoring: Hardware Design and Prototype Development. Sensors. 2025. doi:10.3390/s26010116
BibTeX
@article{Phadke2025,
author = {Phadke, Anushka N and Harasheh, Khawlah and Gill, Satinder},
title = {Wearable IoT-Enabled Galvanic Skin Response Device for Objective Pain and Stress Monitoring: Hardware Design and Prototype Development},
journal = {Sensors},
year = {2025},
doi = {10.3390/s26010116}
}
EUVIMED