Phase Measuring Deflectometry for Wafer Thin-Film Stress Mapping
Sensors · 18.12.2025 · 25 (24) · 7668
DOI: 10.3390/s25247668 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 18.12.2025. Verfasst von Yang Gao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory of Engineering Mechanics, Southeast University, Nanjing 210096, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration.
Abstract (Originalsprache)
Wafer-level thin-film stress measurement is essential for reliable semiconductor fabrication. However, existing techniques present limitations in practice. Interferometry achieves high precision but at a cost that becomes prohibitive for large wafers. Meanwhile laser-scanning systems are more affordable but can only provide sparse data points. This work develops a phase-measuring deflectometry (PMD) system to bridge this gap and deliver a full-field solution for wafer stress mapping. The implementation addresses three key challenges in adapting PMD. First, screen positioning and orientation are refined using an inverse bundle-adjustment approach, which performs multi-parameter optimization without re-optimizing the camera model and simultaneously uses residuals to quantify screen deformation. Second, a backward-propagation ray-tracing framework benchmarks two iterative strategies to resolve the slope-height ambiguity which is a fundamental challenge in PMD caused by the absence of a fixed optical center on the source side. The reprojection constraint strategy is selected for its superior convergence precision. Third, this strategy is integrated with regional wavefront reconstruction based on Hermite interpolation to effectively eliminate edge artifacts. Experimental results demonstrate a peak-to-valley error in the reconstructed topography of 0.48 µm for a spherical mirror with a radius of 500 mm. The practical utility of the system is confirmed through curvature mapping of a 12-inch patterned wafer and further validated by stress measurements on an 8-inch bare wafer, which show less than 5% deviation from industry-standard instrumentation. These results validate the proposed PMD method as an accurate and cost-effective approach for production-scale thin-film stress inspection.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Jiangsu Key Laboratory of Engineering Mechanics, Southeast University, Nanjing 210096, China.
- Shanghai Key Laboratory of Modern Optical System, University of Shanghai for Science and Technology, Shanghai 200093, China.
- Suzhou Raphael Optech Co., Ltd., Suzhou 215400, China.
- School of Science, Nanjing University of Science and Technology, Nanjing 211189, China.
- Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration, Wuhan University, Wuhan 430072, China.
ORCID-Profile: Yang Gao
Förderung
- National Natural Science Foundation of China
- Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration
Zitieren
APA
Gao, Y., Wan, X., Hsin, K., Tao, J., Yin, Z., & Yang, F. (2025). Phase Measuring Deflectometry for Wafer Thin-Film Stress Mapping. Sensors, 25(24), 7668. https://doi.org/10.3390/s25247668
Vancouver
Gao Y, Wan X, Hsin K, Tao J, Yin Z, Yang F. Phase Measuring Deflectometry for Wafer Thin-Film Stress Mapping. Sensors. 2025;25(24):7668. doi:10.3390/s25247668
BibTeX
@article{Gao2025,
author = {Gao, Yang and Wan, Xinjun and Hsin, Kunying and Tao, Jiaqing and Yin, Zhuoyi and Yang, Fujun},
title = {Phase Measuring Deflectometry for Wafer Thin-Film Stress Mapping},
journal = {Sensors},
year = {2025},
volume = {25},
number = {24},
pages = {7668},
doi = {10.3390/s25247668}
}
EUVIMED