Evaluation of a Silicon Carbide Static Induction Transistor for High Frequency/High Temperature Sensor Interface Circuits: Measurements and Modeling
Sensors · 18.11.2025 · 25 (22) · 7051
DOI: 10.3390/s25227051 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 18.11.2025. Verfasst von Jonathon R Grgat und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical, Computer, and Systems Engineering, Case Western Reserve University, Cleveland, OH 44106, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Long Lived In-Situ Solar System Exploration Program at NASA Glenn Research Center, U.S. Department of Defense Science, Mathematics, and Research for Transformation (SMART) Program, Long Lived In Situ Solar System Exploration Program at NASA Glenn Research Center.
Abstract (Originalsprache)
In this paper, we report on the characterization of a silicon carbide static induction transistor (SiC SIT) for potential use in sensor interface circuits that operate at frequencies up to 100 MHz and temperatures up to 400 °C. Measurements were performed to generate current–voltage curves, capacitive transistor characteristics, and high-frequency scattering parameters at temperatures between 25 and 400 °C. The measured data were used to extrapolate the transconductance, gm, as a function of temperature and to develop a small signal model. Circuit simulation tools were used to generate scattering parameters, which were compared to the measured values. At 400 °C, the maximum difference between the measured and simulated scattering parameters for frequencies from 20 to 100 MHz were all less than 0.1 dB, indicating strong agreement between the model and measurement results. The average transition frequency, ft, calculated from measured parameters was 197.8 MHz, which compares favorably to the simulated value from the model (200 MHz). This is also the first paper to report the characterization of a SiC SIT at temperatures above 100 °C. The high-temperature model is the first of its kind for a silicon carbide static induction transistor and the findings reported herein provide a platform to stimulate further development for sensor interface circuits that require transistors that operate at both high frequency and high temperature.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical, Computer, and Systems Engineering, Case Western Reserve University, Cleveland, OH 44106, USA.
- Communications and Intelligent Design Division at NASA Glenn Research Center, Cleveland, OH 44135, USA.
ORCID-Profile: Maximilian C Scardelletti, Christian A Zorman
Förderung
- Long Lived In-Situ Solar System Exploration Program at NASA Glenn Research Center
- U.S. Department of Defense Science, Mathematics, and Research for Transformation (SMART) Program
- Long Lived In Situ Solar System Exploration Program at NASA Glenn Research Center
Zitieren
APA
Grgat, J. R., Scardelletti, M. C., & Zorman, C. A. (2025). Evaluation of a Silicon Carbide Static Induction Transistor for High Frequency/High Temperature Sensor Interface Circuits: Measurements and Modeling. Sensors, 25(22), 7051. https://doi.org/10.3390/s25227051
Vancouver
Grgat JR, Scardelletti MC, Zorman CA. Evaluation of a Silicon Carbide Static Induction Transistor for High Frequency/High Temperature Sensor Interface Circuits: Measurements and Modeling. Sensors. 2025;25(22):7051. doi:10.3390/s25227051
BibTeX
@article{Grgat2025,
author = {Grgat, Jonathon R and Scardelletti, Maximilian C and Zorman, Christian A},
title = {Evaluation of a Silicon Carbide Static Induction Transistor for High Frequency/High Temperature Sensor Interface Circuits: Measurements and Modeling},
journal = {Sensors},
year = {2025},
volume = {25},
number = {22},
pages = {7051},
doi = {10.3390/s25227051}
}
EUVIMED