EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Printed Sensors for Quantifying Electrodermal Activity and Sweat Rate: A Review

Batoul Hosseinzadeh, Sarah Tonello, Nicola Francesco Lopomo iD, Emilio Sardini iD

Sensors · 2025

DOI: 10.3390/s25226878 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, 2025. Verfasst von Batoul Hosseinzadeh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Engineering, University of Brescia, Via Branze, 38, 25123 Brescia, Italy. Hauptthemen laut MEDLINE: Sweat, Biosensing Techniques, Galvanic Skin Response, Sweating. Die Arbeit nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MICS (Made in Italy Circular and Sustainable) Extended Partnership, Next Generation European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Monitoring electrodermal activity (EDA) and sweat rate (SR) and volume hold promise for yielding neurological health insights about individuals. A combination of standard EDA monitoring with the quantitative analysis of perspired sweat volume, rate, and composition represents a promising advancement for improving the understanding and reliability of EDA signals. In this picture, exploiting printed electronics to face challenges related to bulky gold-standard setups and to achieve integration in fully wearable devices represents one of the most interesting approaches addressed by recent research. In this review, we present an overview of the principal techniques, materials, and measurement methods reported for fabricating EDA and sweat monitoring electrodes. We highlight the increasing effect of printing technologies as a key enabler for scalable, low-cost, and customizable fabrication of flexible sensors suited for on-skin applications. These approaches not only support mass production but also enhance adaptability and comfort in wearable formats. Overall, the review emphasizes how printed technologies significantly improve physiological signal quality and open new opportunities for continuous, non-invasive, and personalized health monitoring.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SweatBiosensing TechniquesGalvanic Skin ResponseSweatingHumansWearable Electronic DevicesMonitoring, PhysiologicElectrodes

Stichwörter der Autor:innen

electrodermal activityprinted sensorssweat monitoring

Autor:innen und Institutionen

  • Department of Information Engineering, University of Brescia, Via Branze, 38, 25123 Brescia, Italy.
  • Department of Design, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy.

ORCID-Profile: Nicola Francesco Lopomo, Emilio Sardini

Förderung

  • MICS (Made in Italy Circular and Sustainable) Extended Partnership
  • Next Generation European Union

Zitieren

APA

Hosseinzadeh, B., Tonello, S., Lopomo, N. F., & Sardini, E. (2025). Printed Sensors for Quantifying Electrodermal Activity and Sweat Rate: A Review. Sensors. https://doi.org/10.3390/s25226878

Vancouver

Hosseinzadeh B, Tonello S, Lopomo NF, Sardini E. Printed Sensors for Quantifying Electrodermal Activity and Sweat Rate: A Review. Sensors. 2025. doi:10.3390/s25226878

BibTeX
@article{Hosseinzadeh2025,
  author = {Hosseinzadeh, Batoul and Tonello, Sarah and Lopomo, Nicola Francesco and Sardini, Emilio},
  title = {Printed Sensors for Quantifying Electrodermal Activity and Sweat Rate: A Review},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25226878}
}
Kostenlos starten →