EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Binocular Stereo Vision-Based Structured Light Scanning System Calibration and Workpiece Surface Measurement Accuracy Analysis

Xinbo Zhang iD, Li Luo, Rui Ma, Yuexue Wang, Shi Xie, Hao Zhang, Yiqing Zou, Xiaohao Wang, Xinghui Li

Sensors · 18.10.2025 · 25 (20) · 6455

DOI: 10.3390/s25206455 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.10.2025. Verfasst von Xinbo Zhang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Natural Science Foundation, Shenzhen Science and Technology Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precise online measurement of large structural components is urgently needed in modern manufacturing and intelligent construction, requiring a measurement range over 1 m, near-millimeter accuracy, second-level measurement speed, and adaptability to complex environments. In this paper, three mainstream measurement technologies, namely the image method, line laser scanning method, and structured light method, are comparatively analyzed. The structured light method exhibits remarkable comprehensive advantages in terms of accuracy and speed; however, it suffers from the issue of occlusion during contour measurement. To tackle this problem, multi-camera stitching is employed, wherein the accuracy of camera calibration plays a crucial role in determining the quality of point cloud stitching. Focusing on the cable tightening scenario of meter-diameter cables in cable-stayed bridges, this study develops a contour measurement system based on the collaboration of multiple structured light cameras. Measurement indicators are optimized through modeling analysis, system construction, and performance verification. During verification, four structured light scanners were adopted, and measurements were repeated 11 times for the test workpieces. Experimental results demonstrate that although the current measurement errors have not yet been stably controlled within the millimeter level, this research provides technical exploration and practical experience for high-precision measurement in the field of intelligent construction, thus laying a solid foundation for subsequent accuracy improvement.

Schlagwörter

Stichwörter der Autor:innen

large structural component measurementmeasurement accuracymulti-camera calibrationpoint cloud stitchingstructured light

Autor:innen und Institutionen

  • Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China.
  • Equipment Technology Research Institute, Liuzhou OVM Machinery Co., Ltd., Liuzhou 545006, China.

ORCID-Profile: Xinbo Zhang

Förderung

  • Shenzhen Natural Science Foundation
  • Shenzhen Science and Technology Program

Zitieren

APA

Zhang, X., Luo, L., Ma, R., Wang, Y., Xie, S., Zhang, H., Zou, Y., Wang, X., & Li, X. (2025). Binocular Stereo Vision-Based Structured Light Scanning System Calibration and Workpiece Surface Measurement Accuracy Analysis. Sensors, 25(20), 6455. https://doi.org/10.3390/s25206455

Vancouver

Zhang X, Luo L, Ma R, Wang Y, Xie S, Zhang H, et al. Binocular Stereo Vision-Based Structured Light Scanning System Calibration and Workpiece Surface Measurement Accuracy Analysis. Sensors. 2025;25(20):6455. doi:10.3390/s25206455

BibTeX
@article{Zhang2025,
  author = {Zhang, Xinbo and Luo, Li and Ma, Rui and Wang, Yuexue and Xie, Shi and Zhang, Hao and Zou, Yiqing and Wang, Xiaohao and Li, Xinghui},
  title = {Binocular Stereo Vision-Based Structured Light Scanning System Calibration and Workpiece Surface Measurement Accuracy Analysis},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {20},
  pages = {6455},
  doi = {10.3390/s25206455}
}
Kostenlos starten →