EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing the Output Performance of Fiber-TENG Through Graphite Doping and Its Application in Human Motion Sensing

You-Jun Huang, Jen-I Chuang, Chen-Kuei Chung iD

Sensors · 2025

DOI: 10.3390/s25206409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von You-Jun Huang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan. Hauptthemen laut MEDLINE: Graphite, Wearable Electronic Devices. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, Taiwan, National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Triboelectric nanogenerators (TENG) are mechanical energy harvesters characterized by high sensitivity and simple structure and are currently being widely developed for use in human body motion sensing. Among them, fiber-based TENGs (FTENG) are particularly suitable for wearable human motion sensors due to their unique structure, which offers flexibility, high durability, and comfort. However, studies involving doping to further modify the electrical output characteristics of FTENGs are very limited. Here, we propose an innovative approach that combines graphite (GP) doping with fiber-based TENG fabrication, successfully developing a graphite-doped polyester fiber-based TENG (GP@PET-TENG). Proper graphite doping can increase the amount of transferred charge and thus improve the output electrical performance of TENG, but this method has rarely been explored in FTENG. With the incorporation of 3%wt graphite, the open-circuit voltage of the GP@PET-TENG increased from 103.3 V to 202.1 V, and the short-circuit current increased from 60.7 μA to 105.1 μA, compared to the pure polyester fiber based TENG (PET-TENG). The device achieved a maximum output power of 4.15 mW (2.59 W/m2), demonstrates the capability to charge various capacitors, and successfully lit up 200 LEDs. By attaching the GP@PET tribo-layer to human skin, a single-electrode mode TENG can be formed, which captures the subject’s motion signals through skin contact and separation, converting them into voltage outputs. In fist-clenching and wrist-bending tests, motion-induced voltage signals up to 0.6 V were recorded, demonstrating the potential applications in rehabilitation assistance and mechanical control.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GraphiteWearable Electronic DevicesHumansMovementEquipment DesignNanotechnologyMotion

Stichwörter der Autor:innen

energy harvesterfiberforce sensorsgraphitetriboelectric nanogenerators

Substanzen

Graphite

Autor:innen und Institutionen

  • Department of Mechanical Engineering, National Cheng Kung University, Tainan 701, Taiwan.

ORCID-Profile: Chen-Kuei Chung

Förderung

  • National Science and Technology Council, Taiwan
  • National Science and Technology Council

Zitieren

APA

Huang, Y. J., Chuang, J. I., & Chung, C. K. (2025). Enhancing the Output Performance of Fiber-TENG Through Graphite Doping and Its Application in Human Motion Sensing. Sensors. https://doi.org/10.3390/s25206409

Vancouver

Huang YJ, Chuang JI, Chung CK. Enhancing the Output Performance of Fiber-TENG Through Graphite Doping and Its Application in Human Motion Sensing. Sensors. 2025. doi:10.3390/s25206409

BibTeX
@article{Huang2025,
  author = {Huang, You-Jun and Chuang, Jen-I and Chung, Chen-Kuei},
  title = {Enhancing the Output Performance of Fiber-TENG Through Graphite Doping and Its Application in Human Motion Sensing},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25206409}
}
Kostenlos starten →