3D-Printed Wearable Sensors for the Identification of Shoulder Movement Planes
Sensors · 2025
DOI: 10.3390/s25185853 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Alfredo Dimo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department Traumatology and Sports Medicine, Fondazione Policlinico Universitario Campus Bio-Medico, Via Alvaro del Portillo, 00128 Rome, Italy. Hauptthemen laut MEDLINE: Wearable Electronic Devices, Printing, Three-Dimensional, Shoulder, Shoulder Joint. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Italian Ministry of Health.
Abstract (Originalsprache)
Rotator cuff injuries are a leading cause of shoulder disability, directly impacting joint mobility and overall quality of life. Effective recovery in these patients depends not only on surgical intervention, when necessary, but also on accurate and continuous monitoring of joint movements during rehabilitation, especially across multiple anatomical planes. Traditional tools, such as clinical assessments or motion capture systems, are often subjective or expensive and impractical for routine use. In this context, wearable devices are emerging as a viable alternative, offering the ability to collect real-time, non-invasive, and repeatable data, both in clinical and home settings. This study presents innovative wearable sensors, developed through 3D printing and integrated with fiber Bragg grating technology, designed to detect the shoulder’s planes of motion (sagittal, scapular, and frontal) during flexion–extension movements. Two wearable sensors made of thermoplastic polyurethane (TPU 85A and 95A) were fabricated and subjected to metrological characterization, including strain and temperature sensitivity, hysteresis error, and tear resistance, and tested on eight healthy volunteers. The results demonstrated high discriminative ability, with sensitivity values up to 0.76 nm/mε and low hysteresis errors. The proposed system represents a promising, cost-effective, and customizable solution for motion monitoring during shoulder rehabilitation.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department Traumatology and Sports Medicine, Fondazione Policlinico Universitario Campus Bio-Medico, Via Alvaro del Portillo, 00128 Rome, Italy.
- Fondazione Policlinico Universitario Campus Bio-Medico, Via Alvaro del Portillo, 200, 00128 Rome, Italy.
- Aspetar Orthopedic and Sports Medicine Hospital, Aspire Zone, Sportscity Street 1, Doha P.O. Box 29222, Qatar.
- Department of Medical and Surgical Sciences, University of Catanzaro "Magna Graecia", 88100 Catanzaro, Italy.
- Research Center on Musculoskeletal Health, MusculoSkeletalHealth@UMG, University of Catanzaro "Magna Graecia", 88100 Catanzaro, Italy.
- Department of Engineering, Università Campus Bio-Medico di Roma, Via Alvaro del Portillo, 00128 Rome, Italy.
ORCID-Profile: Alfredo Dimo, Umile Giuseppe Longo, Alessandro de Sire, Emiliano Schena, Daniela Lo Presti
Förderung
- Italian Ministry of Health
Zitieren
APA
Dimo, A., Longo, U. G., D'Hooghe, P., de Sire, A., Papalia, R., Schena, E., & Lo Presti, D. (2025). 3D-Printed Wearable Sensors for the Identification of Shoulder Movement Planes. Sensors. https://doi.org/10.3390/s25185853
Vancouver
Dimo A, Longo UG, D'Hooghe P, de Sire A, Papalia R, Schena E, et al. 3D-Printed Wearable Sensors for the Identification of Shoulder Movement Planes. Sensors. 2025. doi:10.3390/s25185853
BibTeX
@article{Dimo2025,
author = {Dimo, Alfredo and Longo, Umile Giuseppe and D'Hooghe, Pieter and de Sire, Alessandro and Papalia, Rocco and Schena, Emiliano and Lo Presti, Daniela},
title = {3D-Printed Wearable Sensors for the Identification of Shoulder Movement Planes},
journal = {Sensors},
year = {2025},
doi = {10.3390/s25185853}
}
EUVIMED