Application of MWD Sensor System in Auger for Real-Time Monitoring of Soil Resistance During Pile Drilling
Sensors · 16.08.2025 · 25 (16) · 5095
DOI: 10.3390/s25165095 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 16.08.2025. Verfasst von Krzysztof Trojnar und 1 weiteren Autor:innen. Beteiligte Einrichtung: Road and Bridges Department, The Faculty of Civil and Environmental Engineering and Architecture, Rzeszów University of Technology, 12 Powstańców War…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Private founder: Aprofi, a foundation works contractor, Poland, Aprofi, Rzeszów University of Technology, Poland.
Abstract (Originalsprache)
Measuring-while-drilling (MWD) techniques have great potential for use in geotechnical engineering research. This study first addresses the current use of MWD, which consists of recording data using sensors in a drilling machine operating on site. It then addresses the currently unsolved problems of quality control in drilled piles and assessments of their interaction with the soil under load. Next, an original method of drilling displacement piles using a special EGP auger (Electro-Geo-Probe) is presented. The innovation of this new drilling system lies in the placement of the sensors inside the EGP auger in the soil. These innovative sensors form an integrated measurement system, enabling improved real-time control during pile drilling. The most original idea is the use of a Cone Penetration Test (CPT) probe that can be periodically and remotely inserted at a specific depth below the pile base being drilled. This new MWD-EGP system with cutting-edge sensors to monitor the soil’s impact on piles during drilling revolutionizes pile drilling quality control. Furthermore, implementing this in-auger sensor system is a step towards the development of digital drilling rigs, which will provide better pile quality thanks to solutions based on the results of real-time, on-site soil testing. Finally, examples of measurements taken with the new sensor-equipped auger and a preliminary interpretation of the results in non-cohesive soils are presented. The obtained data confirm the usefulness of the new drilling system for improving the quality of piles and advancing research in geotechnical engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Road and Bridges Department, The Faculty of Civil and Environmental Engineering and Architecture, Rzeszów University of Technology, 12 Powstańców Warszawy Ave., 35-959 Rzeszów, Poland.
- Independend Researcher, 20 Przemysłowa St., 39-200 Dębica, Poland.
ORCID-Profile: Krzysztof Trojnar
Förderung
- Private founder: Aprofi, a foundation works contractor, Poland
- Aprofi
- Rzeszów University of Technology, Poland
Zitieren
APA
Trojnar, K., & Siry, A. (2025). Application of MWD Sensor System in Auger for Real-Time Monitoring of Soil Resistance During Pile Drilling. Sensors, 25(16), 5095. https://doi.org/10.3390/s25165095
Vancouver
Trojnar K, Siry A. Application of MWD Sensor System in Auger for Real-Time Monitoring of Soil Resistance During Pile Drilling. Sensors. 2025;25(16):5095. doi:10.3390/s25165095
BibTeX
@article{Trojnar2025,
author = {Trojnar, Krzysztof and Siry, Aleksander},
title = {Application of MWD Sensor System in Auger for Real-Time Monitoring of Soil Resistance During Pile Drilling},
journal = {Sensors},
year = {2025},
volume = {25},
number = {16},
pages = {5095},
doi = {10.3390/s25165095}
}
EUVIMED