EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scatterometry-Based Monitoring of Laser-Induced Periodic Surface Structures on Stainless Steel

Agustín Götte iD, Marcelo Sallese, Fabian Ränke, Bogdan Voisiat iD, Andrés Fabián Lasagni iD, Marcos Soldera iD

Sensors · 13.08.2025 · 25 (16) · 5031

DOI: 10.3390/s25165031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.08.2025. Verfasst von Agustín Götte und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institut für Fertigungstechnik, Technische Universität Dresden, George-Bähr-Str. 3c, 01069 Dresden, Germany. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: TUD Excite, Werner Siemens-Stiftung, Prototype development of a universal monitoring system for repetitive structures.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Monitoring of laser-based processes is essential for ensuring the quality of produced surface structures and for maintaining the process stability and reproducibility. Optical methods based on scatterometry are attractive for industrial monitoring as they are fast, non-contact, non-destructive, and can resolve features down to the sub-microscale. Here, Laser-Induced Periodic Surface Structures (LIPSS) are produced on stainless steel using ultrashort laser pulses in combination with a polygon scanning system. After the process, the fabricated LIPSS features are characterized by microscopy methods and with an optical setup based on scatterometry. Images of the diffraction patterns are collected and the intensity distribution analyzed and compared to the microscopy results in order to estimate the LIPSS height, spatial period, and regularity. The resulting analysis allows us to study LIPSS formation development, even when its characteristic diffraction pattern gradually changes from a double-sickle shape to a diffuse cloud. The scatterometry setup could be used to infer LIPSS height up to 420 nm, with an estimated average error of 7.7% for the highest structures and 11.4% in the whole working range. Periods estimation presents an average error of ~5% in the range where LIPSS are well-defined. In addition, the opening angle of the LIPSS was monitored and compared with regularity measurements, indicating that angles exceeding a certain threshold correspond to surfaces where sub-structures dominate over LIPSS.

Schlagwörter

Stichwörter der Autor:innen

in-line process monitoringlaser-induced periodic surface structures (LIPSS)scatterometryultrashort pulsed laser processing

Autor:innen und Institutionen

  • Institut für Fertigungstechnik, Technische Universität Dresden, George-Bähr-Str. 3c, 01069 Dresden, Germany.
  • Fraunhofer-Institut für Werkstoff- und Strahltechnik IWS, Winterbergstr. 28, 01277 Dresden, Germany.

ORCID-Profile: Agustín Götte, Bogdan Voisiat, Andrés Fabián Lasagni, Marcos Soldera

Förderung

  • TUD Excite
  • Werner Siemens-Stiftung
  • Prototype development of a universal monitoring system for repetitive structures
  • Saxon State Ministry of Economic Affairs, Labor and Transport
  • Werner Siemens Foundation under the project “Second Life Metal Components—A Pathfinding Project for Upcycling”

Zitieren

APA

Götte, A., Sallese, M., Ränke, F., Voisiat, B., Lasagni, A. F., & Soldera, M. (2025). Scatterometry-Based Monitoring of Laser-Induced Periodic Surface Structures on Stainless Steel. Sensors, 25(16), 5031. https://doi.org/10.3390/s25165031

Vancouver

Götte A, Sallese M, Ränke F, Voisiat B, Lasagni AF, Soldera M. Scatterometry-Based Monitoring of Laser-Induced Periodic Surface Structures on Stainless Steel. Sensors. 2025;25(16):5031. doi:10.3390/s25165031

BibTeX
@article{Gtte2025,
  author = {Götte, Agustín and Sallese, Marcelo and Ränke, Fabian and Voisiat, Bogdan and Lasagni, Andrés Fabián and Soldera, Marcos},
  title = {Scatterometry-Based Monitoring of Laser-Induced Periodic Surface Structures on Stainless Steel},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {16},
  pages = {5031},
  doi = {10.3390/s25165031}
}
Kostenlos starten →