Ultrafast Laser-Induced Surface Texturing to Enhance Stainless Steel Gliding on Snow
Nanomaterials · 13.06.2026 · 16 (12) · 740
DOI: 10.3390/nano16120740 ↗Kurz gefasst
Fachartikel in der Zeitschrift Nanomaterials, online erschienen am 13.06.2026. Verfasst von Guglielmo Marchesa und 8 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento Ingegneria, Università degli Studi di Palermo, Viale delle Scienze Ed.8, 90128 Palermo, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Provincia Autonoma di Trento, Autonomous Province of Trento (Italy) within the LP 6/23, art. 19, “Linea d’intervento per il sostegno della ricerca, dello sviluppo e dell’innovazione” fundin….
Abstract (Originalsprache)
Ultra-High Molecular Weight Polyethylene (UHMWPE), the standard base material in ski manufacturing, offers excellent gliding performance but exhibits limited mechanical and scratch resistance on hard and icy snow conditions. In this work, stainless steel is proposed as a mechanically robust alternative, and its inherently higher friction against snow is addressed through surface engineering. The snow friction behavior of 301H stainless steel surfaces decorated with fishbone-like microstructures combined with Laser-Induced Periodic Surface Structures (LIPSSs) was investigated using a custom-built snow tribometer. Several pattern designs, with different pitch distances and depths, were engraved using femtosecond laser pulse irradiation. We conducted morphological, physical, and chemical investigations through microscopy, static contact angle measurements, and X-ray Photoelectron Spectroscopy analyses. Results indicate that the gliding performance is not directly related to the modifications in surface chemistry and wetting behavior of the samples but is affected by the geometry and orientation with respect to the sliding direction of the specific micro- and nano-features. Overall, we achieved friction coefficient values comparable to those found in UHMWPE with a fast and economically sustainable single-step laser-texturing process. This approach allows the industrial up-scaling of the fishbone-texture design to real-size alpine ski prototypes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dipartimento Ingegneria, Università degli Studi di Palermo, Viale delle Scienze Ed.8, 90128 Palermo, Italy.
- Dipartimento Energia, Politecnico di Milano, Via Lambruschini 4a, 20156 Milano, Italy.
- Kirana S.r.l., Via Fortunato Zeni 8, Polo Meccatronica, 38068 Rovereto, Italy.
- Dipartimento Scienze Matematiche e Informatiche, Scienze Fisiche e Scienze della Terra, Università degli Studi di Messina, Viale Ferdinando Stagno d'Alcontres 31, 98166 Messina, Italy.
ORCID-Profile: Matteo Verdi, Enza Fazio, Paolo Maria Ossi
Förderung
- Provincia Autonoma di Trento
- Autonomous Province of Trento (Italy) within the LP 6/23, art. 19, “Linea d’intervento per il sostegno della ricerca, dello sviluppo e dell’innovazione” fundin…
Zitieren
APA
Marchesa, G., Puppo, L., Verdi, M., Dassiè, G., Bassi, F., Negri, E., Fazio, E., Gallus, E., & Ossi, P. M. (2026). Ultrafast Laser-Induced Surface Texturing to Enhance Stainless Steel Gliding on Snow. Nanomaterials, 16(12), 740. https://doi.org/10.3390/nano16120740
Vancouver
Marchesa G, Puppo L, Verdi M, Dassiè G, Bassi F, Negri E, et al. Ultrafast Laser-Induced Surface Texturing to Enhance Stainless Steel Gliding on Snow. Nanomaterials. 2026;16(12):740. doi:10.3390/nano16120740
BibTeX
@article{Marchesa2026,
author = {Marchesa, Guglielmo and Puppo, Lorenzo and Verdi, Matteo and Dassiè, Giorgia and Bassi, Federico and Negri, Etienne and Fazio, Enza and Gallus, Enrico and Ossi, Paolo Maria},
title = {Ultrafast Laser-Induced Surface Texturing to Enhance Stainless Steel Gliding on Snow},
journal = {Nanomaterials},
year = {2026},
volume = {16},
number = {12},
pages = {740},
doi = {10.3390/nano16120740}
}
EUVIMED