EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Model Updating for a Continuous Beam-Arch Composite Bridge Based on the RSM and a Nutcracker Optimization Algorithm

Weihua Zhou, Hongyin Yang iD, Jing Hao, Mengxiang Zhai, Hongyou Cao, Zhangjun Liu, Kang Wang

Sensors · 06.08.2025 · 25 (15) · 4831

DOI: 10.3390/s25154831 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.08.2025. Verfasst von Weihua Zhou und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430073, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Projects Foundation of Engineering Research Center of Disaster Prevention and Mitigation of Southeast Coastal Engineering Structures of Fujian Province Un…, Construction Science and Technology Plan Projects of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate finite element (FE) models are essential for the safety assessment of civil engineering structures. However, obtaining reliable model parameters for existing bridges remains challenging due to the inability to conduct static load tests without disrupting traffic flow. To address this, this study proposes an FE model updating framework that integrates the response surface method and the nutcracker optimization algorithm (NOA). This framework is characterized by the incorporation of ambient vibration data into parameter optimization, thereby enhancing model accuracy. The stochastic subspace identification method is first adopted to extract the bridge’s natural frequencies from vibration data. The response surface method is then employed to construct a response surface function that approximates the FE model. The NOA is subsequently applied to iteratively optimize this response surface function, ensuring rapid convergence and the precise adjustment of the FE model parameter. To validate the effectiveness of the proposed framework, a continuous beam–arch composite bridge with a span of 204.783 m was selected as a case study. The results indicate that the proposed method reduced the average frequency error from 5.58% to 2.75% by updating the model parameters. While the whale optimization algorithm required 21 iterations and the grey wolf optimizer needed 41 iterations to converge near the minimum, the NOA achieved this in merely 13 iterations, demonstrating the NOA’s superior convergence speed. Furthermore, the NOA significantly outperformed both the whale optimization algorithm and the grey wolf optimizer in reducing the error of the first transverse vibration frequency.

Schlagwörter

Stichwörter der Autor:innen

continuous beam–arch composite bridgefinite element model updatingnutcracker optimization algorithmresponse surface methodstochastic subspace identification

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430073, China.
  • State Key Laboratory of Bridge Intelligent and Green Construction, Wuhan 430034, China.
  • School of Civil Engineering and Architecture, Wuhan University of Technology, Wuhan 430070, China.

ORCID-Profile: Hongyin Yang

Förderung

  • National Natural Science Foundation of China
  • Open Projects Foundation of Engineering Research Center of Disaster Prevention and Mitigation of Southeast Coastal Engineering Structures of Fujian Province Un…
  • Construction Science and Technology Plan Projects of Hubei Province
  • 16th Graduate Education Innovation Fund of Wuhan University of Engineering

Zitieren

APA

Zhou, W., Yang, H., Hao, J., Zhai, M., Cao, H., Liu, Z., & Wang, K. (2025). Finite Element Model Updating for a Continuous Beam-Arch Composite Bridge Based on the RSM and a Nutcracker Optimization Algorithm. Sensors, 25(15), 4831. https://doi.org/10.3390/s25154831

Vancouver

Zhou W, Yang H, Hao J, Zhai M, Cao H, Liu Z, et al. Finite Element Model Updating for a Continuous Beam-Arch Composite Bridge Based on the RSM and a Nutcracker Optimization Algorithm. Sensors. 2025;25(15):4831. doi:10.3390/s25154831

BibTeX
@article{Zhou2025,
  author = {Zhou, Weihua and Yang, Hongyin and Hao, Jing and Zhai, Mengxiang and Cao, Hongyou and Liu, Zhangjun and Wang, Kang},
  title = {Finite Element Model Updating for a Continuous Beam-Arch Composite Bridge Based on the RSM and a Nutcracker Optimization Algorithm},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {15},
  pages = {4831},
  doi = {10.3390/s25154831}
}
Kostenlos starten →