FE Model Updating of Continuous Beam Bridge Based on Response Surface Method
Buildings · 01.04.2024 · 14 (4) · 960
DOI: 10.3390/buildings14040960 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 01.04.2024. Verfasst von Fang Dong und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program, Shenzhen Urban Public Safety and Technology Institute.
Abstract (Originalsprache)
In this paper, A high-order response surface method is proposed for finite element model updating of continuous beam bridges. Firstly, based on visual inspection and environmental vibration testing, the peak picking (PP) method and random subspace identification (SSI) method are used to identify the dynamic characteristic parameters of the structure. Then, the finite element model of the continuous beam bridge is updated based on the third-order response surface method. It can be concluded that the results of the updated finite element model are in good agreement with the test results, and the maximum error between the calculated and measured frequency is less than 3%, with MAC values greater than 85%. Moreover, the updated finite element model can reflect the current situation of real bridges and serve as the basis for bridge health monitoring, damage detection, and safety assessment.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program
- Shenzhen Urban Public Safety and Technology Institute
- Key Laboratory of Urban Safety Risk Monitoring and Early Warning
- Ministry of Emergency Management
- Shenzhen Science and Technology Program
Zitieren
APA
Dong, F., Shi, Z., Zhong, R., & Jin, N. (2024). FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings, 14(4), 960. https://doi.org/10.3390/buildings14040960
Vancouver
Dong F, Shi Z, Zhong R, Jin N. FE Model Updating of Continuous Beam Bridge Based on Response Surface Method. Buildings. 2024;14(4):960. doi:10.3390/buildings14040960
BibTeX
@article{Dong2024,
author = {Dong, Fang and Shi, Zhongqi and Zhong, Rumian and Jin, Nan},
title = {FE Model Updating of Continuous Beam Bridge Based on Response Surface Method},
journal = {Buildings},
year = {2024},
volume = {14},
number = {4},
pages = {960},
doi = {10.3390/buildings14040960}
}
EUVIMED