EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Validation of an Active Headrest System with Integrated Sensing in Rear-End Crash Scenarios

Alexandru Ionut Radu iD, Bogdan Adrian Tolea iD, Horia Beles iD, Florin Bogdan Scurt iD, Adrian Nicolaie Tusinean

Sensors · 2025

DOI: 10.3390/s25144291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Alexandru Ionut Radu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Automotive and Transport, Faculty of Mechanical Engineering, Transilvania University of Brasov, 500036 Brasov, Romania. Hauptthemen laut MEDLINE: Accidents, Traffic, Head Protective Devices. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Transilvania of Brașov, the University of Oradea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rear-end collisions represent a major concern in automotive safety, particularly due to the risk of whiplash injuries among vehicle occupants. The accurate simulation of occupant kinematics during such impacts is critical for the development of advanced safety systems. This paper presents an enhanced multibody simulation model specifically designed for rear-end crash scenarios, incorporating integrated active headrest mechanisms and sensor-based activation logic. The model combines detailed representations of vehicle structures, suspension systems, restraint systems, and occupant biomechanics, allowing for the precise prediction of crash dynamics and occupant responses. The system was developed using Simscape Multibody, with CAD-derived components interconnected through physical joints and validated using controlled experimental crash tests. Special attention was given to modelling contact forces, suspension behaviour, and actuator response times for the active headrest system. The model achieved a root mean square error (RMSE) of 4.19 m/s2 and a mean absolute percentage error (MAPE) of 0.71% when comparing head acceleration in frontal collision tests, confirming its high accuracy. Validation results demonstrate that the model accurately reproduces occupant kinematics and head acceleration profiles, confirming its reliability and effectiveness as a predictive tool. This research highlights the critical role of integrated sensor-actuator systems in improving occupant safety and provides a flexible platform for future studies on intelligent vehicle safety technologies.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Accidents, TrafficHead Protective DevicesHumansBiomechanical PhenomenaEquipment DesignAccelerationComputer SimulationWhiplash Injuries

Stichwörter der Autor:innen

Simscape multibodyactive headrestcrash testdynamic simulationintegrated sensormathematical modelmultibodysimulation

Autor:innen und Institutionen

  • Department of Automotive and Transport, Faculty of Mechanical Engineering, Transilvania University of Brasov, 500036 Brasov, Romania.
  • Department of Mechanical Engineering and Automotive, Faculty of Managerial and Technological Engineering, University of Oradea, 410087 Oradea, Romania.
  • Advanced Mechatronik Technologies SRL, 500025 Brasov, Romania.

ORCID-Profile: Alexandru Ionut Radu, Bogdan Adrian Tolea, Horia Beles, Florin Bogdan Scurt

Förderung

  • University Transilvania of Brașov
  • the University of Oradea

Zitieren

APA

Radu, A. I., Tolea, B. A., Beles, H., Scurt, F. B., & Tusinean, A. N. (2025). Design and Validation of an Active Headrest System with Integrated Sensing in Rear-End Crash Scenarios. Sensors. https://doi.org/10.3390/s25144291

Vancouver

Radu AI, Tolea BA, Beles H, Scurt FB, Tusinean AN. Design and Validation of an Active Headrest System with Integrated Sensing in Rear-End Crash Scenarios. Sensors. 2025. doi:10.3390/s25144291

BibTeX
@article{Radu2025,
  author = {Radu, Alexandru Ionut and Tolea, Bogdan Adrian and Beles, Horia and Scurt, Florin Bogdan and Tusinean, Adrian Nicolaie},
  title = {Design and Validation of an Active Headrest System with Integrated Sensing in Rear-End Crash Scenarios},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25144291}
}
Kostenlos starten →