EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Survey on Design and Control Methodologies of High- Torque-Density Joints for Compliant Lower-Limb Exoskeleton

Jingbo Xu iD, Silu Chen iD, Shupei Li iD, Yong Liu iD, Hongyu Wan iD, Zhuang Xu iD, Chi Zhang iD

Sensors · 27.06.2025 · 25 (13) · 4016

DOI: 10.3390/s25134016 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 27.06.2025. Verfasst von Jingbo Xu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Medical Devices, Zhejiang Pharmaceutical University, Ningbo 315500, China. Hauptthemen laut MEDLINE: Exoskeleton Device, Lower Extremity, Joints. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 143 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Department of Education, National Natural Science Foundation of China, Ningbo Science and Technology Bureau.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The lower-limb assistance exoskeleton is increasingly being utilized in various fields due to its excellent performance in human body assistance. As a crucial component of robots, the joint is expected to be designed with a high-output torque to support hip and knee movement, and lightweight to enhance user experience. Contrasted with the elastic actuation with harmonic drive and other flexible transmission, the non-elastic quasi-direct actuation is more promising to be applied in exoskeleton due to its advanced dynamic performance and lightweight feature. Moreover, robot joints are commonly driven electrically, especially by a permanent magnet synchronous motor which is rapidly developed because of its compact structure and powerful output. Based on different topological structures, numerous research focus on torque density, ripple torque suppression, efficiency improvement, and thermal management to improve motor performance. Furthermore, the elaborated joint with powerful motors should be controlled compliantly to improve flexibility and interaction, and therefore, popular complaint control algorithms like impedance and admittance controls are discussed in this paper. Through the review and analysis of the integrated design from mechanism structure to control algorithm, it is expected to indicate developmental prospects of lower-limb assistance exoskeleton joints with optimized performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Exoskeleton DeviceLower ExtremityJointsHumansTorqueEquipment DesignRoboticsAlgorithms

Stichwörter der Autor:innen

exoskeletonflexible jointharmonic drivehuman-robot interactionimpedance controlpermanent magnet synchronous motorseries elastic actuatortorque motor

Autor:innen und Institutionen

  • School of Medical Devices, Zhejiang Pharmaceutical University, Ningbo 315500, China.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
  • Department of Electrical and Electronic Engineering, University of Nottingham Ningbo China, Ningbo 315100, China.

ORCID-Profile: Jingbo Xu, Silu Chen, Shupei Li, Yong Liu, Hongyu Wan, Zhuang Xu, Chi Zhang

Förderung

  • Zhejiang Department of Education
  • National Natural Science Foundation of China
  • Ningbo Science and Technology Bureau

Zitieren

APA

Xu, J., Chen, S., Li, S., Liu, Y., Wan, H., Xu, Z., & Zhang, C. (2025). A Survey on Design and Control Methodologies of High- Torque-Density Joints for Compliant Lower-Limb Exoskeleton. Sensors, 25(13), 4016. https://doi.org/10.3390/s25134016

Vancouver

Xu J, Chen S, Li S, Liu Y, Wan H, Xu Z, et al. A Survey on Design and Control Methodologies of High- Torque-Density Joints for Compliant Lower-Limb Exoskeleton. Sensors. 2025;25(13):4016. doi:10.3390/s25134016

BibTeX
@article{Xu2025,
  author = {Xu, Jingbo and Chen, Silu and Li, Shupei and Liu, Yong and Wan, Hongyu and Xu, Zhuang and Zhang, Chi},
  title = {A Survey on Design and Control Methodologies of High- Torque-Density Joints for Compliant Lower-Limb Exoskeleton},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {13},
  pages = {4016},
  doi = {10.3390/s25134016}
}
Kostenlos starten →