EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons

Giorgos Marinou iD, Ibrahima Kourouma, Katja Mombaur iD

Sensors · 2025

DOI: 10.3390/s25082379 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Giorgos Marinou und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Computer Engineering (ZITI), Heidelberg University, 69120 Heidelberg, Germany. Hauptthemen laut MEDLINE: Exoskeleton Device, Lower Extremity, Gait, Gait Analysis. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carl Zeiss Foundation, Carl Zeiss Foundation for the HeiAge Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With rapid advancements in lower-limb exoskeleton hardware, two key challenges persist: the accurate assessment of user biomechanics and the reliable control of device behavior in real-world settings. This study presents a modular, sensor-based system designed to enhance both biomechanical evaluation and control of lower-limb exoskeletons, leveraging advanced sensor technologies and fuzzy logic. The system addresses the limitations of traditional lab-bound, high-cost methods by integrating inertial measurement units, force-sensitive resistors, and load cells into instrumented crutches and 3D-printed insoles. These components work independently or in unison to capture critical biomechanical metrics, including the anteroposterior center of pressure and crutch ground reaction forces. Data are processed in real time by a central unit using fuzzy logic algorithms to estimate gait phases and support exoskeleton control. Validation experiments with three participants, benchmarked against motion capture and force plate systems, demonstrate the system’s ability to reliably detect gait phases and accurately measure biomechanical parameters. By offering an open-source, cost-effective design, this work contributes to the advancement of wearable robotics and promotes broader innovation and accessibility in exoskeleton research.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Exoskeleton DeviceLower ExtremityGaitGait AnalysisHumansBiomechanical PhenomenaRoboticsWearable Electronic DevicesMaleAdultAlgorithmsFuzzy LogicEquipment Design

Stichwörter der Autor:innen

3D-printed insoleIMUcrutchesexoskeletonsforce sensorsgaithuman–robot interactionpressure sensorswearable roboticswearable sensors

Autor:innen und Institutionen

  • Institute of Computer Engineering (ZITI), Heidelberg University, 69120 Heidelberg, Germany.
  • Institute for Anthropomatics and Robotics, Optimization and Biomechanics for Human-Centred Robotics, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany.
  • Department of Systems Design Engineering, CERC Human-Centred Robotics and Machine Intelligence, University of Waterloo, Waterloo, ON N2L 3G1, Canada.

ORCID-Profile: Giorgos Marinou, Katja Mombaur

Förderung

  • Carl Zeiss Foundation
  • Carl Zeiss Foundation for the HeiAge Project

Zitieren

APA

Marinou, G., Kourouma, I., & Mombaur, K. (2025). Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons. Sensors. https://doi.org/10.3390/s25082379

Vancouver

Marinou G, Kourouma I, Mombaur K. Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons. Sensors. 2025. doi:10.3390/s25082379

BibTeX
@article{Marinou2025,
  author = {Marinou, Giorgos and Kourouma, Ibrahima and Mombaur, Katja},
  title = {Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25082379}
}
Kostenlos starten →