EUVIMEDSkopri EUVIMED
Open access · CC BY 4.0

A Wearable Sensor Node for Measuring Air Quality Through Citizen Science Approach: Insights from the SOCIO-BEE Project

Nicole Morresi iD, Maite Puerta-Beldarrain iD, Diego López-de-Ipiña iD, Alex Barco, Oihane Gómez-Carmona iD, Carlos López-Gomollon iD, Diego Casado-Mansilla iD, Maria Kotzagianni, Sara Casaccia iD, Sergi Udina, Gian Marco Revel iD

Sensors · 2025-06-15 · 25 (12) · 3739

DOI: 10.3390/s25123739 ↗

At a glance

Journal article in Sensors, published online on 2025-06-15. Written by Nicole Morresi and 10 co-authors. Institution: Department of Industrial Engineering and Mathematical Sciences, Polytechnic University of Marche, 60131 Ancona, Italy. Major MEDLINE topics: Wearable Electronic Devices, Citizen Science, Environmental Monitoring, Air Pollution. Cited 6 times so far (Crossref); 22 references. The full text is freely available (open access, CC BY 4.0). Funded by: SOCIO-BEE Horizon Europe project, DEUSTEK5 (IT1582-22) Basque University system’s A grade research team.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Air pollution is a major environmental and public health challenge, especially in urban areas where fine-grained air quality data are essential to effective interventions. Traditional monitoring networks, while accurate, often lack spatial resolution and public engagement. This study presents a novel wearable wireless sensor node (WSN) that was developed within the Horizon Europe SOCIO-BEE project to support air quality monitoring through citizen science (CS). The low-cost, body-mounted WSN measures NO2, O3, and PM2.5. Three pilot campaigns were conducted in Ancona (Italy), Maroussi (Greece), and Zaragoza (Spain), and involved diverse user groups—seniors, commuters, and students, respectively. PM2.5 sensor data were validated through two approaches: direct comparison with reference stations and spatial clustering analysis using K-means. The results show strong correlation with official PM2.5 data (R2 = 0.75), with an average absolute error of 0.54 µg/m3 and a statistical confidence interval of ±3.3 µg/m3. In Maroussi and Zaragoza, where no reference stations were available, the clustering approach yielded low intra-cluster coefficients of variation (CV = 0.50 ± 0.40 in Maroussi, CV = 0.28 ± 0.30 in Zaragoza), indicating that the measurements had high internal consistency and spatial homogeneity. Beyond technical validation, user engagement and perceptions were evaluated through pre-/post-campaign surveys. Across all pilots, over 70% of participants reported satisfaction with the system’s usability and inclusiveness. The findings demonstrate that wearable low-cost sensors, when supported by a structured engagement and data validation framework, can provide reliable, actionable air quality data, empowering citizens and informing evidence-based environmental policy.

Subjects

MeSH terms (MEDLINE)

Wearable Electronic DevicesCitizen ScienceEnvironmental MonitoringAir PollutionHumansParticulate MatterAir Pollutants

Author keywords

air qualitycitizen sciencewearable devices

Substances

Particulate MatterAir Pollutants

Authors and institutions

  • Department of Industrial Engineering and Mathematical Sciences, Polytechnic University of Marche, 60131 Ancona, Italy.
  • DeustoTech, University of Deusto, 48007 Bilbao, Spain.
  • Ayuntamiento de Zaragoza, 50003 Zaragoza, Spain.
  • Municipality of Amaroussion, 15100 Athens, Greece.
  • Data Science Team, Bettair Cities SL, 08907 Barcelona, Spain.

ORCID profiles: Nicole Morresi, Maite Puerta-Beldarrain, Diego López-de-Ipiña, Oihane Gómez-Carmona, Carlos López-Gomollon, Diego Casado-Mansilla, Sara Casaccia, Gian Marco Revel

Funding

  • SOCIO-BEE Horizon Europe project
  • DEUSTEK5 (IT1582-22) Basque University system’s A grade research team

Cite

APA

Morresi, N., Puerta-Beldarrain, M., López-de-Ipiña, D., Barco, A., Gómez-Carmona, O., López-Gomollon, C., Casado-Mansilla, D., Kotzagianni, M., Casaccia, S., Udina, S., & Revel, G. M. (2025). A Wearable Sensor Node for Measuring Air Quality Through Citizen Science Approach: Insights from the SOCIO-BEE Project. Sensors, 25(12), 3739. https://doi.org/10.3390/s25123739

Vancouver

Morresi N, Puerta-Beldarrain M, López-de-Ipiña D, Barco A, Gómez-Carmona O, López-Gomollon C, et al. A Wearable Sensor Node for Measuring Air Quality Through Citizen Science Approach: Insights from the SOCIO-BEE Project. Sensors. 2025;25(12):3739. doi:10.3390/s25123739

BibTeX
@article{Morresi2025,
  author = {Morresi, Nicole and Puerta-Beldarrain, Maite and López-de-Ipiña, Diego and Barco, Alex and Gómez-Carmona, Oihane and López-Gomollon, Carlos and Casado-Mansilla, Diego and Kotzagianni, Maria and Casaccia, Sara and Udina, Sergi and Revel, Gian Marco},
  title = {A Wearable Sensor Node for Measuring Air Quality Through Citizen Science Approach: Insights from the SOCIO-BEE Project},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {12},
  pages = {3739},
  doi = {10.3390/s25123739}
}
Start for free →