Microwire vs. Micro-Ribbon Magnetoelastic Sensors for Vibration-Based Structural Health Monitoring of Rectangular Concrete Beams
Sensors · 07.06.2025 · 25 (12) · 3590
DOI: 10.3390/s25123590 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 07.06.2025. Verfasst von Christos I Tapeinos und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, University of Patras, 26504 Patras, Greece. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Two different magnetoelastic Metglas materials with distinct shapes were compared as sensing elements for the structural health monitoring of concrete beams. One had a ribbon shape, while the other had a microwire shape. The sensing elements were attached to different concrete beams, and a crack was introduced into each beam. The beams were subjected to flexural vibrations, and their deformations were recorded wirelessly by coils, detecting the magnetic signals emitted due to the magnetoelastic nature of the sensors. Fast Fourier Analysis of the received signal revealed the bending mode frequencies of the beams, which serve as a “signature” of their structural health. In these spectra, the ribbon-shaped sensor exhibited a 1.4-times stronger signal than the microwire sensor. However, the extracted mode frequencies were nearly identical, with differences of less than 1% both before and after damage. This indicates that both sensors can be used equivalently to monitor structural damage in concrete beams. The damage-related relative frequency shifts ranged from −0.01 to −0.03, with similar results for both sensors. Thermal annealing was also studied and appeared to significantly enhance the signal by 10–30%, likely due to the relaxation of internal stresses induced during the rapid solidification synthesis of these materials. This enhancement was more pronounced in the ribbon-shaped sensor. This study is the first to utilize a magnetoelastic microwire sensor for damage detection in concrete beams.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, University of Patras, 26504 Patras, Greece.
- Institute of Materials Science of Madrid, ICMM/CSIC, 28049 Madrid, Spain.
- Department of Mechanical and Manufacturing Engineering, University of Cyprus, 1678 Nicosia, Cyprus.
ORCID-Profile: Manuel Vázquez
Zitieren
APA
Tapeinos, C. I., Kouzoudis, D., Varvatsoulis, K., Vázquez, M., & Samourgkanidis, G. (2025). Microwire vs. Micro-Ribbon Magnetoelastic Sensors for Vibration-Based Structural Health Monitoring of Rectangular Concrete Beams. Sensors, 25(12), 3590. https://doi.org/10.3390/s25123590
Vancouver
Tapeinos CI, Kouzoudis D, Varvatsoulis K, Vázquez M, Samourgkanidis G. Microwire vs. Micro-Ribbon Magnetoelastic Sensors for Vibration-Based Structural Health Monitoring of Rectangular Concrete Beams. Sensors. 2025;25(12):3590. doi:10.3390/s25123590
BibTeX
@article{Tapeinos2025,
author = {Tapeinos, Christos I and Kouzoudis, Dimitris and Varvatsoulis, Kostantis and Vázquez, Manuel and Samourgkanidis, Georgios},
title = {Microwire vs. Micro-Ribbon Magnetoelastic Sensors for Vibration-Based Structural Health Monitoring of Rectangular Concrete Beams},
journal = {Sensors},
year = {2025},
volume = {25},
number = {12},
pages = {3590},
doi = {10.3390/s25123590}
}
EUVIMED