EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Low-Cost Multimodal Testbed for Array-Based Electrophysiological Microelectrodes

Cat-Vu H Bui iD, Neethu Maliakal, Hasan Ulusan, Andreas Hierlemann iD, Fernando Cardes iD

Sensors · 2025

DOI: 10.3390/s25092874 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2025. Verfasst von Cat-Vu H Bui und 4 weiteren Autor:innen. Beteiligte Einrichtung: Bio Engineering Laboratory, Department of Biosystems Science and Engineering, ETH Zurich, 4056 Basel, Switzerland. Hauptthemen laut MEDLINE: Electrophysiology, Electrophysiological Phenomena. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Research Council, Swiss National Science Foundation, State Secretariat for Education, Research, and Innovation (SBFI).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrode designs and materials have become an increasingly important performance driver for microelectrode arrays, which are among the essential tools for cellular electrophysiology. Ongoing works have continuously innovated over a diverse range of electrode shapes, sizes, and materials. The large design and fabrication parameter space represents rich opportunities for optimizing performance and functionalities as well as a challenge for electrode developers due to a lack of predictive simulation software to aid design works. Electrode prototypes often need to be fabricated, empirically evaluated, and iteratively optimized at significant cost. Efficient hardware testing solutions to aid the development of new electrodes, especially at an early stage when the number of candidate designs is still high, are therefore increasingly important. Here, we propose and implement a cost-effective testbed platform, which is aimed at obtaining first-order characteristics from electrode prototypes to inform early-stage screening and refinement. Upon testing with microfabricated electrodes, the platform was shown to achieve an impedance measurement accuracy comparable to commercial equipment and effectively recorded extracellular action potentials of in vitro rat cortical neurons. By providing relevant electrode testing at a significantly lower cost, in a more compact form, and with greater ease of assembly, compared to existing hardware solutions, the presented testbed can meaningfully lower entry barriers for the development of new array-based electrophysiological microelectrodes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ElectrophysiologyElectrophysiological PhenomenaMicroelectrodesAnimalsRatsNeuronsAction PotentialsEquipment DesignElectric Impedance

Stichwörter der Autor:innen

cellular electrophysiologyelectrochemical impedance spectroscopyinstrumentationmicroelectrode arraysmicrofabrication

Autor:innen und Institutionen

  • Bio Engineering Laboratory, Department of Biosystems Science and Engineering, ETH Zurich, 4056 Basel, Switzerland.
  • Department of Electrical and Electronics Engineering, Middle East Technical University, 06800 Ankara, Türkiye.

ORCID-Profile: Cat-Vu H Bui, Andreas Hierlemann, Fernando Cardes

Förderung

  • European Research Council
  • Swiss National Science Foundation
  • State Secretariat for Education, Research, and Innovation (SBFI)

Zitieren

APA

Bui, C. H., Maliakal, N., Ulusan, H., Hierlemann, A., & Cardes, F. (2025). A Low-Cost Multimodal Testbed for Array-Based Electrophysiological Microelectrodes. Sensors. https://doi.org/10.3390/s25092874

Vancouver

Bui CH, Maliakal N, Ulusan H, Hierlemann A, Cardes F. A Low-Cost Multimodal Testbed for Array-Based Electrophysiological Microelectrodes. Sensors. 2025. doi:10.3390/s25092874

BibTeX
@article{Bui2025,
  author = {Bui, Cat-Vu H and Maliakal, Neethu and Ulusan, Hasan and Hierlemann, Andreas and Cardes, Fernando},
  title = {A Low-Cost Multimodal Testbed for Array-Based Electrophysiological Microelectrodes},
  journal = {Sensors},
  year = {2025},
  doi = {10.3390/s25092874}
}
Kostenlos starten →