A Novel Inductive Displacement Sensor Based on Dual-Excitation and Single-Sensing Coils for Core Displacement Measurement
Sensors · 30.04.2025 · 25 (9) · 2827
DOI: 10.3390/s25092827 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 30.04.2025. Verfasst von Longjiang Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Power Transmission Equipment Technology, School of Electrical Engineering, Chongqing University, Chongqing 400444, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, Natural Science Foundation of Chongqing, Key Laboratory Fund for the Nuclear Reactor System Design Technology.
Abstract (Originalsprache)
This article develops a new inductive displacement sensor with a segmented multi-group coil structure, which is suitable for the displacement measurement of control rods in nuclear reactors. Each group coil of the sensor consists of two excitation coils and one sensing coil. The excitation and sensing coils are segmented to extend the linearity range of the displacement sensor. It abandons the traditional sensor’s method of using nonlinear compensation to achieve large-stroke displacement measurement. Providing an alternating current (AC) signal to the excitation coil and processing the induced voltage generated by each sensing coil can directly achieve the high-precision measurement of core displacement. The mathematical model of the variations in the sensing coil voltage caused by the movement of the core is established. The impacts of the excitation coil structure, the number of turns of the excitation coil, and the excitation frequency on the output characteristics of the designed sensor are analyzed by finite element simulation. Based on the analysis and design, a sensor prototype is built and tested in the laboratory. The measurement results show that the linearity error is 0.35% and the maximum measuring error can be limited within 1.5 mm, which is sufficient to meet the practical requirements in a nuclear reactor environment.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Power Transmission Equipment Technology, School of Electrical Engineering, Chongqing University, Chongqing 400444, China.
- Science and Technology on Reactor System Design Technology Laboratory, Nuclear Power Institute of China, Chengdu 610213, China.
ORCID-Profile: Longjiang Gao, Qiwei Xu, Yiru Miao, Wei Zhang, Chunlei Wang, Mengshu Li, Shihan Tang
Förderung
- Fundamental Research Funds for the Central Universities
- Natural Science Foundation of Chongqing
- Key Laboratory Fund for the Nuclear Reactor System Design Technology
Zitieren
APA
Gao, L., Xu, Q., Miao, Y., Zhang, W., Wang, C., Li, M., & Tang, S. (2025). A Novel Inductive Displacement Sensor Based on Dual-Excitation and Single-Sensing Coils for Core Displacement Measurement. Sensors, 25(9), 2827. https://doi.org/10.3390/s25092827
Vancouver
Gao L, Xu Q, Miao Y, Zhang W, Wang C, Li M, et al. A Novel Inductive Displacement Sensor Based on Dual-Excitation and Single-Sensing Coils for Core Displacement Measurement. Sensors. 2025;25(9):2827. doi:10.3390/s25092827
BibTeX
@article{Gao2025,
author = {Gao, Longjiang and Xu, Qiwei and Miao, Yiru and Zhang, Wei and Wang, Chunlei and Li, Mengshu and Tang, Shihan},
title = {A Novel Inductive Displacement Sensor Based on Dual-Excitation and Single-Sensing Coils for Core Displacement Measurement},
journal = {Sensors},
year = {2025},
volume = {25},
number = {9},
pages = {2827},
doi = {10.3390/s25092827}
}
EUVIMED