EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Balancing of Resonant Differential Coils for Broadband Inductive Sensor Systems

Liam A Marsh iD, Adam D Fletcher iD, Anthony J Peyton iD

Sensors · 17.09.2024 · 24 (18) · 6009

DOI: 10.3390/s24186009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 17.09.2024. Verfasst von Liam A Marsh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic and Electrical Engineering, University of Manchester, Manchester M13 9PL, UK. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 'The Sir Bobby Charlton Foundation, The Sir Bobby Charlton Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Differential coils are frequently implemented in inductive sensing systems. They can be considered as a single coil that is made up of two or more subcoils, wound in series opposition. They can be used on the transmit or receive side of measurement systems, and, if designed correctly, ensure no coupling between coils under background conditions. By cancelling background coupling, the receive electronics only needs to be able to measure the change in coupling produced by a target. This allows for a more efficient use of the dynamic range, and for larger receive-side amplifier gain, thereby improving SNR. When subcoils are not electrically similar, it can be hard to engineer the coil to be perfectly balanced across a wide bandwidth. This paper presents an analytical model of a resonant differential coil pair that is tested and applied on a planar metal detector for the detection of buried objects. The model demonstrates the capability to balance an arbitrary differential coil pair, which has a broad applicability across a range of inductive sensor applications such as metal detection and non-destructive testing. The method is applied to the practical system. The results show that the correction resulting from this method ensures a stable balance across a significantly enhanced bandwidth. In the case studied here, the bandwidth of the experimental system is increased from 20 kHz to 90 kHz.

Schlagwörter

Stichwörter der Autor:innen

NDTbroadband sensor systemsdifferential coil pairgradiometerinductive sensor systemsmagnetic induction spectroscopymetal detectionresonant coils

Autor:innen und Institutionen

  • Department of Electronic and Electrical Engineering, University of Manchester, Manchester M13 9PL, UK.

ORCID-Profile: Liam A Marsh, Adam D Fletcher, Anthony J Peyton

Förderung

  • 'The Sir Bobby Charlton Foundation
  • The Sir Bobby Charlton Foundation

Zitieren

APA

Marsh, L. A., Fletcher, A. D., & Peyton, A. J. (2024). Balancing of Resonant Differential Coils for Broadband Inductive Sensor Systems. Sensors, 24(18), 6009. https://doi.org/10.3390/s24186009

Vancouver

Marsh LA, Fletcher AD, Peyton AJ. Balancing of Resonant Differential Coils for Broadband Inductive Sensor Systems. Sensors. 2024;24(18):6009. doi:10.3390/s24186009

BibTeX
@article{Marsh2024,
  author = {Marsh, Liam A and Fletcher, Adam D and Peyton, Anthony J},
  title = {Balancing of Resonant Differential Coils for Broadband Inductive Sensor Systems},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {18},
  pages = {6009},
  doi = {10.3390/s24186009}
}
Kostenlos starten →