EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Understanding Acceleration-Based Load Metrics: From Concepts to Implementation

João Freitas iD, Alexandre Moreira iD, João Carvalho iD, Filipe Conceição iD, Luisa Estriga iD

Sensors · 27.04.2025 · 25 (9) · 2764

DOI: 10.3390/s25092764 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 27.04.2025. Verfasst von João Freitas und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Sport, University of Porto, 4200-450 Porto, Portugal. Hauptthemen laut MEDLINE: Accelerometry, Acceleration. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accelerometer-based wearables offer a cost-effective solution for managing match and training loads in invasion team sports. However, a multitude of acceleration-derived metrics, each employing different algorithms, has led to inconsistent and incomparable outcomes across studies and devices. This article reviews the mathematical procedures underlying whole-body mechanical load metrics, clarifies their conceptual differences, and proposes refinements to enhance standardization. Synthetic data were employed to investigate conceptual differences, while experimental accelerometric data (463 time series) from a set of elite handball training sessions (involving 16 players) were used to implement the corrected equations and analyze statistical relationships. Analysis of synthetic data revealed that derivative-based metrics, such as Jerk Modulus (typically referred to as Player Load) and corrected Accel’Rate (cAccel’Rate), tend to amplify noise compared to acceleration-based metrics, such as universal Dynamic Stress Load (uDSL) and Body Load. Experimental results indicated that when metrics were summed, their values were nearly identical. In time-series comparisons, Jerk Modulus and cAccel’Rate were predictably found to be nearly identical, while Body Load was the most distinct. Acceleration-based metrics are preferable to derivative-based ones. Sports scientists should lead the design and validation of such metrics, ensuring methodological rigor, transparency, and innovation while preventing commercial interests from introducing rebranded variables with undisclosed scaling factors and unclear calculations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AccelerometryAccelerationHumansAlgorithmsSportsWearable Electronic Devices

Stichwörter der Autor:innen

Accel’RateDynamic Stress LoadJerkaccelerometrybody loadworkload

Autor:innen und Institutionen

  • Faculty of Sport, University of Porto, 4200-450 Porto, Portugal.
  • COD, Centre of Sports Optimization, Sporting Clube de Portugal, 1600-464 Lisbon, Portugal.
  • CEIIA, Engineering and Product Development Center, 4450-017 Matosinhos, Portugal.
  • Algoritmi-Embedded Systems Research Group, Universidade do Minho, 4804-533 Guimarães, Portugal.
  • CIFI2D, Centre for Research, Education, Innovation and Intervention in Sport, University of Porto, 4200-450 Porto, Portugal.
  • LABIOMEP, Porto Biomechanics Laboratory, University of Porto, 4200-450 Porto, Portugal.

ORCID-Profile: João Freitas, Alexandre Moreira, João Carvalho, Filipe Conceição, Luisa Estriga

Zitieren

APA

Freitas, J., Moreira, A., Carvalho, J., Conceição, F., & Estriga, L. (2025). Understanding Acceleration-Based Load Metrics: From Concepts to Implementation. Sensors, 25(9), 2764. https://doi.org/10.3390/s25092764

Vancouver

Freitas J, Moreira A, Carvalho J, Conceição F, Estriga L. Understanding Acceleration-Based Load Metrics: From Concepts to Implementation. Sensors. 2025;25(9):2764. doi:10.3390/s25092764

BibTeX
@article{Freitas2025,
  author = {Freitas, João and Moreira, Alexandre and Carvalho, João and Conceição, Filipe and Estriga, Luisa},
  title = {Understanding Acceleration-Based Load Metrics: From Concepts to Implementation},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {9},
  pages = {2764},
  doi = {10.3390/s25092764}
}
Kostenlos starten →