Extension to the Jiles–Atherton Hysteresis Model Using Gaussian Distributed Parameters for Quenched and Tempered Engineering Steels
Sensors · 21.02.2025 · 25 (5) · 1328
DOI: 10.3390/s25051328 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 21.02.2025. Verfasst von Alasdair Regan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Electronic Engineering, The University of Manchester, Oxford Road, Manchester M13 9PL, UK. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC and RCNDE, Engineering and Physical Sciences Research Council (EPSRC), Research Centre for Non-Destructive Evaluation (RCNDE).
Abstract (Originalsprache)
The Jiles–Atherton (J–A) model has seen extensive use for modelling the hysteresis behaviour of ferromagnetic materials due to its computational efficiency, simplicity of use, and small number of physically related parameters. However, in this work, the application of the J–A model to hysteresis curves obtained from experimental measurements for as-quenched and quenched-and-tempered engineering steels is considered. It has been demonstrated that the current form of the J–A model is not capable of representing certain observed features in the obtained hysteresis curves of these steels, in particular, the rapid narrowing of the loops seen for as-quenched steels and the sharp corners seen for quenched-and-tempered steels. This work has shown that a superior fit to the major loops for such steels can be obtained by applying Gaussian variations with respect to the applied magnetic field to the model parameters. The findings are supported by experimental results from engineering steels used in the oil and gas industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical and Electronic Engineering, The University of Manchester, Oxford Road, Manchester M13 9PL, UK.
ORCID-Profile: Alasdair Regan, John Wilson, Anthony J Peyton
Förderung
- EPSRC and RCNDE
- Engineering and Physical Sciences Research Council (EPSRC)
- Research Centre for Non-Destructive Evaluation (RCNDE)
- Tenaris Connections B.V.
Zitieren
APA
Regan, A., Wilson, J., & Peyton, A. J. (2025). Extension to the Jiles–Atherton Hysteresis Model Using Gaussian Distributed Parameters for Quenched and Tempered Engineering Steels. Sensors, 25(5), 1328. https://doi.org/10.3390/s25051328
Vancouver
Regan A, Wilson J, Peyton AJ. Extension to the Jiles–Atherton Hysteresis Model Using Gaussian Distributed Parameters for Quenched and Tempered Engineering Steels. Sensors. 2025;25(5):1328. doi:10.3390/s25051328
BibTeX
@article{Regan2025,
author = {Regan, Alasdair and Wilson, John and Peyton, Anthony J},
title = {Extension to the Jiles–Atherton Hysteresis Model Using Gaussian Distributed Parameters for Quenched and Tempered Engineering Steels},
journal = {Sensors},
year = {2025},
volume = {25},
number = {5},
pages = {1328},
doi = {10.3390/s25051328}
}
EUVIMED