EUVIMEDUpptäck EUVIMED
Open access · CC BY 4.0

Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors

Changyeop Jeon iD, Mijin Kim, Jinwoo Kim, Sunghee Yang, Eunseo Choi iD, Byeonghwa Lim iD

Sensors · 2025-02-18 · 25 (4) · 1235

DOI: 10.3390/s25041235 ↗

At a glance

Journal article in Sensors, published online on 2025-02-18. Written by Changyeop Jeon and 5 co-authors. Institution: Department of Physics and Chemistry, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea. Cited 1 times so far (Crossref); 30 references. The full text is freely available (open access, CC BY 4.0). Funded by: Research Fund of Andong National University.

AbstractSubjectsBibliografiska uppgifterCiteRelated studies

Abstract (original language)

Planar Hall magnetoresistance (PHMR) sensors are widely utilized due to their high sensitivity, simple structure, and cost-effectiveness. However, their performance is influenced by both the driving mode and the thickness of the ferromagnetic layer, yet the combined effects of these factors remain insufficiently explored. This study systematically investigates the impact of Ni80Fe20 thickness (5–35 nm) on PHMR sensor performance under constant current (CC) and constant voltage (CV) modes, with a focus on optimizing the peak-to-peak voltage (Vp-p). In CC mode, electron surface scattering at 5–10 nm increases resistance, leading to a sharp rise in Vp-p, followed by a decline as the thickness increases. In contrast, CV mode minimizes resistance-related effects, with sensor signals predominantly governed by magnetization-dependent resistivity. Experimentally, the optimal Vp-p was observed at 25 nm in CV mode. However, for thicknesses beyond this point, the reduction in sensor resistance suggests that voltage distribution across both the sensor and external load resistance significantly influences performance. These findings provide practical insights into optimizing PHMR sensors by elucidating the interplay between driving modes and material properties. The results contribute to the advancement of high-performance PHMR sensors with enhanced signal stability and sensitivity for industrial and scientific applications.

Subjects

Author keywords

constant current modeconstant voltage modedriving modemagnetoresistive sensors

Authors and institutions

  • Department of Physics and Chemistry, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea.
  • Department of Smart Sensor Engineering, Andong National University, Andong-si 36729, Republic of Korea.

ORCID profiles: Changyeop Jeon, Eunseo Choi, Byeonghwa Lim

Funding

  • Research Fund of Andong National University

Cite

APA

Jeon, C., Kim, M., Kim, J., Yang, S., Choi, E., & Lim, B. (2025). Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors. Sensors, 25(4), 1235. https://doi.org/10.3390/s25041235

Vancouver

Jeon C, Kim M, Kim J, Yang S, Choi E, Lim B. Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors. Sensors. 2025;25(4):1235. doi:10.3390/s25041235

BibTeX
@article{Jeon2025,
  author = {Jeon, Changyeop and Kim, Mijin and Kim, Jinwoo and Yang, Sunghee and Choi, Eunseo and Lim, Byeonghwa},
  title = {Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1235},
  doi = {10.3390/s25041235}
}
Start for free →