EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors

Changyeop Jeon iD, Mijin Kim, Jinwoo Kim, Sunghee Yang, Eunseo Choi iD, Byeonghwa Lim iD

Sensors · 18.02.2025 · 25 (4) · 1235

DOI: 10.3390/s25041235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.02.2025. Verfasst von Changyeop Jeon und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Chemistry, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Fund of Andong National University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Planar Hall magnetoresistance (PHMR) sensors are widely utilized due to their high sensitivity, simple structure, and cost-effectiveness. However, their performance is influenced by both the driving mode and the thickness of the ferromagnetic layer, yet the combined effects of these factors remain insufficiently explored. This study systematically investigates the impact of Ni80Fe20 thickness (5–35 nm) on PHMR sensor performance under constant current (CC) and constant voltage (CV) modes, with a focus on optimizing the peak-to-peak voltage (Vp-p). In CC mode, electron surface scattering at 5–10 nm increases resistance, leading to a sharp rise in Vp-p, followed by a decline as the thickness increases. In contrast, CV mode minimizes resistance-related effects, with sensor signals predominantly governed by magnetization-dependent resistivity. Experimentally, the optimal Vp-p was observed at 25 nm in CV mode. However, for thicknesses beyond this point, the reduction in sensor resistance suggests that voltage distribution across both the sensor and external load resistance significantly influences performance. These findings provide practical insights into optimizing PHMR sensors by elucidating the interplay between driving modes and material properties. The results contribute to the advancement of high-performance PHMR sensors with enhanced signal stability and sensitivity for industrial and scientific applications.

Schlagwörter

Stichwörter der Autor:innen

constant current modeconstant voltage modedriving modemagnetoresistive sensors

Autor:innen und Institutionen

  • Department of Physics and Chemistry, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea.
  • Department of Smart Sensor Engineering, Andong National University, Andong-si 36729, Republic of Korea.

ORCID-Profile: Changyeop Jeon, Eunseo Choi, Byeonghwa Lim

Förderung

  • Research Fund of Andong National University

Zitieren

APA

Jeon, C., Kim, M., Kim, J., Yang, S., Choi, E., & Lim, B. (2025). Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors. Sensors, 25(4), 1235. https://doi.org/10.3390/s25041235

Vancouver

Jeon C, Kim M, Kim J, Yang S, Choi E, Lim B. Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors. Sensors. 2025;25(4):1235. doi:10.3390/s25041235

BibTeX
@article{Jeon2025,
  author = {Jeon, Changyeop and Kim, Mijin and Kim, Jinwoo and Yang, Sunghee and Choi, Eunseo and Lim, Byeonghwa},
  title = {Systematic Analysis of Driving Modes and NiFe Layer Thickness in Planar Hall Magnetoresistance Sensors},
  journal = {Sensors},
  year = {2025},
  volume = {25},
  number = {4},
  pages = {1235},
  doi = {10.3390/s25041235}
}
Kostenlos starten →