EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Signal Detection by Sensors and Determination of Friction Coefficient During Brake Lining Movement

Leopold Hrabovský iD, Vieroslav Molnár iD, Gabriel Fedorko iD, Nikoleta Mikusova iD, Jan Blata iD, Jiří Fries iD, Tomasz Jachowicz iD

Sensors · 18.12.2024 · 24 (24) · 8078

DOI: 10.3390/s24248078 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.12.2024. Verfasst von Leopold Hrabovský und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Machine and Industrial Design, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Os…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MŠMT CR, VEGA, KEGA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a laboratory device by which the course of two signals can be detected using two types of sensors—strain gauges and the DEWESoft DS-NET measuring apparatus. The values of the coefficient of friction of the brake lining when moving against the rotating shell of the brake drum were determined from the physical quantities sensed by tensometric sensors and transformed into electrical quantities. The friction coefficient of the brake lining on the circumference of the rotating brake disc shell can be calculated from the known values measured by the sensors, the design dimensions of the brake, and the revolutions of the rotating parts system. The values of the friction coefficient were measured during brake lining movement. A woven asbestos-free material, Beral 1126, which contained brass fibers and resin additives, showed slightly higher values when rotating at previously tested speeds compared to the friction coefficient values obtained when the brake drum rotation was uniformly delayed. The methodology for determining the friction coefficient of the brake lining allowed the laboratory device to verify its magnitude for different friction materials under various operating conditions.

Schlagwörter

Stichwörter der Autor:innen

force sensorfriction coefficientlaboratory deviceshoe braketorque sensor

Autor:innen und Institutionen

  • Department of Machine and Industrial Design, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava-Poruba, Czech Republic.
  • Faculty of Manufacturing Technologies, Technical University of Kosice with a Seat in Presov, Bayerova 1, 080 01 Presov, Slovakia.
  • Faculty of BERG, Technical University of Kosice, Park Komenskeho 14, 040 01 Kosice, Slovakia.
  • Faculty of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka St., 20-618 Lublin, Poland.

ORCID-Profile: Leopold Hrabovský, Vieroslav Molnár, Gabriel Fedorko, Nikoleta Mikusova, Jan Blata, Jiří Fries, Tomasz Jachowicz

Förderung

  • MŠMT CR
  • VEGA
  • KEGA
  • APVV
  • ITMS
  • Research and innovation of modern processes and technologies in industrial practice

Zitieren

APA

Hrabovský, L., Molnár, V., Fedorko, G., Mikusova, N., Blata, J., Fries, J., & Jachowicz, T. (2024). Signal Detection by Sensors and Determination of Friction Coefficient During Brake Lining Movement. Sensors, 24(24), 8078. https://doi.org/10.3390/s24248078

Vancouver

Hrabovský L, Molnár V, Fedorko G, Mikusova N, Blata J, Fries J, et al. Signal Detection by Sensors and Determination of Friction Coefficient During Brake Lining Movement. Sensors. 2024;24(24):8078. doi:10.3390/s24248078

BibTeX
@article{Hrabovsk2024,
  author = {Hrabovský, Leopold and Molnár, Vieroslav and Fedorko, Gabriel and Mikusova, Nikoleta and Blata, Jan and Fries, Jiří and Jachowicz, Tomasz},
  title = {Signal Detection by Sensors and Determination of Friction Coefficient During Brake Lining Movement},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {8078},
  doi = {10.3390/s24248078}
}
Kostenlos starten →