EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temperature Influence on Brake Pad Friction Coefficient Modelisation

Costanzo Bellini iD, Vittorio Di Cocco, Daniela Iacoviello, Francesco Iacoviello iD

Materials · 29.12.2023 · 17 (1) · 189

DOI: 10.3390/ma17010189 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.12.2023. Verfasst von Costanzo Bellini und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Via G. Di Biasio, 43, 03043 Cassino, Italy. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Next-Generation EU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) - MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4 - D.D. 1033 17/06/2022, European Union Next-Generation EU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Brake pad linings are an essential part of the correct functioning of braking systems based on the use of pads and discs. Generally, the compounds used to make the gaskets are characterised by the use of over 20 sintered components, which allow friction coefficients that vary between 0.2 and 0.6 at temperatures up to 200 °C. In this work, a traditional compound was investigated under close-to-real conditions in order to evaluate the tribological behaviour at different temperatures. Finally, a model based on the proportionality between temperature increase and relative variation of the friction coefficient was proposed. From the experimental test, it was evident that the friction coefficient increased with the temperature, passing from 0.4 to 0.6 in the temperature range of 100 °C to 180 °C; however, a further temperature increment until 350 °C caused a reduction in the friction coefficient to 0.2. The proposed model was able to anticipate the abovementioned trend, especially at high temperatures.

Schlagwörter

Stichwörter der Autor:innen

brake padsfriction coefficienttribological behaviour

Autor:innen und Institutionen

  • Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, Via G. Di Biasio, 43, 03043 Cassino, Italy.
  • Department of Computer, Control and Management Engineering, Sapienza University of Rome, Via Ariosto, 25, 00185 Roma, Italy.

ORCID-Profile: Costanzo Bellini, Francesco Iacoviello

Förderung

  • European Union Next-Generation EU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR) - MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.4 - D.D. 1033 17/06/2022
  • European Union Next-Generation EU

Zitieren

APA

Bellini, C., Di Cocco, V., Iacoviello, D., & Iacoviello, F. (2023). Temperature Influence on Brake Pad Friction Coefficient Modelisation. Materials, 17(1), 189. https://doi.org/10.3390/ma17010189

Vancouver

Bellini C, Di Cocco V, Iacoviello D, Iacoviello F. Temperature Influence on Brake Pad Friction Coefficient Modelisation. Materials. 2023;17(1):189. doi:10.3390/ma17010189

BibTeX
@article{Bellini2023,
  author = {Bellini, Costanzo and Di Cocco, Vittorio and Iacoviello, Daniela and Iacoviello, Francesco},
  title = {Temperature Influence on Brake Pad Friction Coefficient Modelisation},
  journal = {Materials},
  year = {2023},
  volume = {17},
  number = {1},
  pages = {189},
  doi = {10.3390/ma17010189}
}
Kostenlos starten →