EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Force Feedback Method for Statically Indeterminate Steel Structure Construction Based on Staged Temperature Measurement

Wei Lu iD, Xianwei Fang, Liming Liu, Chunfeng Ao, Weihua Hu iD, Jun Teng, Zhongcheng Huo

Sensors · 18.12.2024 · 24 (24) · 8073

DOI: 10.3390/s24248073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.12.2024. Verfasst von Wei Lu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518000, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Project of Shenzhen Science and Technology Plan, Guangdong Provincial Key Laboratory of Intelligent and Resilient Structures for Civil Engineering.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Structural design usually adopts uniform temperature action. However, during the actual construction of the structure, the temperature field acting on the structure is inhomogeneous. Therefore, the simulation of the construction of statically indeterminate steel structures considering only the uniform temperature field cannot truly reflect the temperature action after structural molding and the evolution of the stress performance of the temporary stress system of structural construction. This paper proposes a force feedback method for the construction of statically indeterminate steel structures based on staged temperature measurements. In this method, the construction sequence and the measured temperature are taken into account, and the structural response under the action of temperature is obtained by using the first processing method in the matrix displacement method and the deformation coordination formula to obtain the deformation and stress values of the structure. The application results show that the structural forces calculated by the method proposed in this paper are closer to the measured data in the field, and the error is reduced by 10~40%. This paper provides a reference for the calculation of construction forces in statically indeterminate steel structures considering the effect of temperature inhomogeneity and provides a basis for construction safety assessment and schedule management.

Schlagwörter

Stichwörter der Autor:innen

construction force feedbackconstruction monitoringconstruction safetystatically indeterminate structurethermal effect

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518000, China.
  • China Construction Steel Engineer Co., Ltd., Shenzhen 518118, China.

ORCID-Profile: Wei Lu, Weihua Hu

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Project of Shenzhen Science and Technology Plan
  • Guangdong Provincial Key Laboratory of Intelligent and Resilient Structures for Civil Engineering

Zitieren

APA

Lu, W., Fang, X., Liu, L., Ao, C., Hu, W., Teng, J., & Huo, Z. (2024). Force Feedback Method for Statically Indeterminate Steel Structure Construction Based on Staged Temperature Measurement. Sensors, 24(24), 8073. https://doi.org/10.3390/s24248073

Vancouver

Lu W, Fang X, Liu L, Ao C, Hu W, Teng J, et al. Force Feedback Method for Statically Indeterminate Steel Structure Construction Based on Staged Temperature Measurement. Sensors. 2024;24(24):8073. doi:10.3390/s24248073

BibTeX
@article{Lu2024,
  author = {Lu, Wei and Fang, Xianwei and Liu, Liming and Ao, Chunfeng and Hu, Weihua and Teng, Jun and Huo, Zhongcheng},
  title = {Force Feedback Method for Statically Indeterminate Steel Structure Construction Based on Staged Temperature Measurement},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {8073},
  doi = {10.3390/s24248073}
}
Kostenlos starten →