A multi-spectral temperature measurement method based on color temperature difference
Review of Scientific Instruments · 01.08.2025 · 96 (8)
DOI: 10.1063/5.0268085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 06.08.2025. Verfasst von Jialin Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 25 Literaturangaben.
Abstract (Originalsprache)
Accurate temperature measurement is pivotal in manufacturing, industrial modernization, and scientific research. This study proposes a multi-spectral thermometry method based on the gray body hypothesis and color temperature difference. The methodology involves selecting a target pixel and any other pixel and measuring their gray value with a multi-spectral thermometer. For an n-channel thermometer, 2n equations can be derived from Wien’s displacement law. Subtracting these equations yields additional n equations, forming a system of 3n equations. These equations are solved via least squares fitting to determine the color temperature and gray body emissivity of both pixels. By establishing the relationship between gray body emissivity and channel-specific emissivity under the gray body approximation, the variance between theoretical and measured emissivity is calculated. The target pixel is combined with other pixels for calculation, and the resulting variances are compared. The temperature and emissivity of the target pixel are determined when the variance is minimized. If the variance meets the measurement error requirements, the corresponding result is regarded as the true temperature. This approach reduces the required number of spectral channels, circumvents overcomplicated emissivity models induced by wide spectral ranges, and enhances measurement accuracy (error <1%) while improving experimental efficiency. The method’s validity is demonstrated through gas discharge temperature measurements, with results cross-verified against rotational temperature data, confirming its applicability in practical scenarios.
Autor:innen und Institutionen
- Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang, China.
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, China.
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China.
ORCID-Profile: Zhefeng Zhang
Zitieren
APA
Yang, J., Yang, L., Wan, X., Zhang, Z., & Shi, Y. (2025). A multi-spectral temperature measurement method based on color temperature difference. Review of Scientific Instruments, 96(8). https://doi.org/10.1063/5.0268085
Vancouver
Yang J, Yang L, Wan X, Zhang Z, Shi Y. A multi-spectral temperature measurement method based on color temperature difference. Review of Scientific Instruments. 2025;96(8). doi:10.1063/5.0268085
BibTeX
@article{Yang2025,
author = {Yang, Jialin and Yang, Lin and Wan, Xiang and Zhang, Zhefeng and Shi, Yuanjie},
title = {A multi-spectral temperature measurement method based on color temperature difference},
journal = {Review of Scientific Instruments},
year = {2025},
volume = {96},
number = {8},
doi = {10.1063/5.0268085}
}
EUVIMED