EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micro Coriolis Mass Flow Sensor with Large Channel Diameter Realized by HNA Wet Etching

Qihui Yu, Maarten J S Bonnema iD, Mahdieh Yariesbouei, Remco J Wiegerink iD, Joost C Lötters

Sensors · 12.12.2024 · 24 (24) · 7952

DOI: 10.3390/s24247952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.12.2024. Verfasst von Qihui Yu und 4 weiteren Autor:innen. Beteiligte Einrichtung: MESA+ Institute for Nanotechnology, University of Twente, 7522 NH Enschede, The Netherlands. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bronkhorst High-Tech BV and TKI HTSM, Bronkhorst High-Tech BV, TKI HTSM.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces a Coriolis mass flow and density sensor. The sensor is made using Surface Channel Technology (SCT) but with selective wet etching to create the channels. This method forms suspended microfluidic channels with a larger cross-sectional area. Because of this larger cross-sectional area, the sensor has a much higher flow range, up to 50 g h−1 (for water) with a pressure drop of 1 bar, compared to the standard SCT-based Coriolis sensor, which is only 1.2 g h−1. The channel has a semi-elliptical cross-sectional area, measuring 200 micrometers wide and 70 micrometers deep. The channel wall is made of a stack of thin films with a total thickness of 2.5 μm. Water, isopropyl alcohol (IPA), and nitrogen (N2) are used to test and evaluate the sensor’s mass flow and density sensing performance.

Schlagwörter

Stichwörter der Autor:innen

Coriolis mass flow sensorHNA etchingmicrofluidic channelsurface channel technology

Autor:innen und Institutionen

  • MESA+ Institute for Nanotechnology, University of Twente, 7522 NH Enschede, The Netherlands.
  • Institute for Biomedical Engineering, University and ETH Zürich, 8092 Zürich, Switzerland.
  • Paul Scherrer Institute, 5232 Villigen, Switzerland.
  • Philips Medical Systems International B.V., 5684 PC Best, The Netherlands.

ORCID-Profile: Maarten J S Bonnema, Remco J Wiegerink

Förderung

  • Bronkhorst High-Tech BV and TKI HTSM
  • Bronkhorst High-Tech BV
  • TKI HTSM

Zitieren

APA

Yu, Q., Bonnema, M. J. S., Yariesbouei, M., Wiegerink, R. J., & Lötters, J. C. (2024). Micro Coriolis Mass Flow Sensor with Large Channel Diameter Realized by HNA Wet Etching. Sensors, 24(24), 7952. https://doi.org/10.3390/s24247952

Vancouver

Yu Q, Bonnema MJS, Yariesbouei M, Wiegerink RJ, Lötters JC. Micro Coriolis Mass Flow Sensor with Large Channel Diameter Realized by HNA Wet Etching. Sensors. 2024;24(24):7952. doi:10.3390/s24247952

BibTeX
@article{Yu2024,
  author = {Yu, Qihui and Bonnema, Maarten J S and Yariesbouei, Mahdieh and Wiegerink, Remco J and Lötters, Joost C},
  title = {Micro Coriolis Mass Flow Sensor with Large Channel Diameter Realized by HNA Wet Etching},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {7952},
  doi = {10.3390/s24247952}
}
Kostenlos starten →