EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates

Nikolaos Angelopoulos iD, Vassilios Kappatos iD

Sensors · 2024-10-06 · 24 (19) · 6462

DOI: 10.3390/s24196462 ↗

At a glance

Journal article in Sensors, published online on 2024-10-06. Written by Nikolaos Angelopoulos and 1 co-authors. Institution: Hellenic Institute of Transport (HIT), Centre for Research and Technology Hellas (CERTH), 57001 Thessaloniki, Greece. Cited 21 times so far (Crossref); 26 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Defence Fund (EDF).

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Acoustic emission (AE) testing is used for the continuous evaluation of structural integrity and the monitoring of damage evolution in structural components and materials. During operation, the environmental and loading conditions of metal structures can result in corrosion and surface wear damage. The early detection of surface degradation flaws is crucial, as they can serve as local stress concentration points, leading to crack initiation and failure. In this work, the effectiveness of AE in monitoring corrosion and surface wear flaw formation was experimentally evaluated. AE sensors were installed on steel test plates during the artificial induction of corrosion and surface wear in order to detect and record the generated AE signals. Corrosion-related AE signals typically exhibit low amplitude, count, and energy values. The direct detection of active corrosion can be challenging in noisy environments, but it can be carried out under certain conditions using dedicated AE sensor groups. Surface-wear-related AE signals exhibit high amplitude, energy, and count values, with long duration values that are associated with wear and grinding conditions. It was found that AE sensors can be utilised to detect corrosion and surface degradation events. The effectiveness of the AE method in detecting surface degradation in noisy environments can be improved by implementing a filtering methodology. This will limit the recording of noise-related signals that can mask out actual surface degradation AE events.

Subjects

Author keywords

acoustic emissioncorrosionsensorsstructural health monitoringsurface degradation monitoring

Authors and institutions

  • Hellenic Institute of Transport (HIT), Centre for Research and Technology Hellas (CERTH), 57001 Thessaloniki, Greece.

ORCID profiles: Nikolaos Angelopoulos, Vassilios Kappatos

Funding

  • European Defence Fund (EDF)

Cite

APA

Angelopoulos, N., & Kappatos, V. (2024). An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates. Sensors, 24(19), 6462. https://doi.org/10.3390/s24196462

Vancouver

Angelopoulos N, Kappatos V. An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates. Sensors. 2024;24(19):6462. doi:10.3390/s24196462

BibTeX
@article{Angelopoulos2024,
  author = {Angelopoulos, Nikolaos and Kappatos, Vassilios},
  title = {An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {19},
  pages = {6462},
  doi = {10.3390/s24196462}
}
Start for free →