EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates

Nikolaos Angelopoulos iD, Vassilios Kappatos iD

Sensors · 06.10.2024 · 24 (19) · 6462

DOI: 10.3390/s24196462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 06.10.2024. Verfasst von Nikolaos Angelopoulos und 1 weiteren Autor:innen. Beteiligte Einrichtung: Hellenic Institute of Transport (HIT), Centre for Research and Technology Hellas (CERTH), 57001 Thessaloniki, Greece. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Defence Fund (EDF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acoustic emission (AE) testing is used for the continuous evaluation of structural integrity and the monitoring of damage evolution in structural components and materials. During operation, the environmental and loading conditions of metal structures can result in corrosion and surface wear damage. The early detection of surface degradation flaws is crucial, as they can serve as local stress concentration points, leading to crack initiation and failure. In this work, the effectiveness of AE in monitoring corrosion and surface wear flaw formation was experimentally evaluated. AE sensors were installed on steel test plates during the artificial induction of corrosion and surface wear in order to detect and record the generated AE signals. Corrosion-related AE signals typically exhibit low amplitude, count, and energy values. The direct detection of active corrosion can be challenging in noisy environments, but it can be carried out under certain conditions using dedicated AE sensor groups. Surface-wear-related AE signals exhibit high amplitude, energy, and count values, with long duration values that are associated with wear and grinding conditions. It was found that AE sensors can be utilised to detect corrosion and surface degradation events. The effectiveness of the AE method in detecting surface degradation in noisy environments can be improved by implementing a filtering methodology. This will limit the recording of noise-related signals that can mask out actual surface degradation AE events.

Schlagwörter

Stichwörter der Autor:innen

acoustic emissioncorrosionsensorsstructural health monitoringsurface degradation monitoring

Autor:innen und Institutionen

  • Hellenic Institute of Transport (HIT), Centre for Research and Technology Hellas (CERTH), 57001 Thessaloniki, Greece.

ORCID-Profile: Nikolaos Angelopoulos, Vassilios Kappatos

Förderung

  • European Defence Fund (EDF)

Zitieren

APA

Angelopoulos, N., & Kappatos, V. (2024). An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates. Sensors, 24(19), 6462. https://doi.org/10.3390/s24196462

Vancouver

Angelopoulos N, Kappatos V. An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates. Sensors. 2024;24(19):6462. doi:10.3390/s24196462

BibTeX
@article{Angelopoulos2024,
  author = {Angelopoulos, Nikolaos and Kappatos, Vassilios},
  title = {An Experimental Assessment Using Acoustic Emission Sensors to Effectively Detect Surface Deterioration on Steel Plates},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {19},
  pages = {6462},
  doi = {10.3390/s24196462}
}
Kostenlos starten →