EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing of Airspeed Measurement Method for UAVs Based on MEMS Pressure Sensors

Zhipeng Chen, Haojie Li, Hang Yu iD, Yuan Zhao, Jing Ma, Chuanhao Zhang iD, He Zhang

Sensors · 09.09.2024 · 24 (17) · 5853

DOI: 10.3390/s24175853 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 09.09.2024. Verfasst von Zhipeng Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China postdoctoral science foundation, Jiangsu funding program for excellent postdoctoral talent.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Airspeed measurement is crucial for UAV control. To achieve accurate airspeed measurements for UAVs, this paper calculates airspeed data by measuring changes in air pressure and temperature. Based on this, a data processing method based on mechanical filtering and the improved AR-SHAKF algorithm is proposed to indirectly measure airspeed with high precision. In particular, a mathematical model for an airspeed measurement system was established, and an installation method for the pressure sensor was designed to measure the total pressure, static pressure, and temperature. Secondly, the measurement principle of the sensor was analyzed, and a metal tube was installed to act as a mechanical filter, particularly in cases where the aircraft has a significant impact on the gas flow field. Furthermore, a time series model was used to establish the sensor state equation and the initial noise values. It also enhanced the Sage–Husa adaptive filter to analyze the unavoidable error impact of initial noise values. By constraining the range of measurement noise, it achieved adaptive noise estimation. To validate the superiority of the proposed method, a low-complexity airspeed measurement device based on MEMS pressure sensors was designed. The results demonstrate that the airspeed measurement device and the designed velocity measurement method can effectively calculate airspeed with high measurement accuracy and strong interference resistance.

Schlagwörter

Stichwörter der Autor:innen

MEMS pressure sensorsUAVsairspeed measurementimproved AR-SHAKF algorithm

Autor:innen und Institutionen

  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.

ORCID-Profile: Hang Yu, Chuanhao Zhang

Förderung

  • China postdoctoral science foundation
  • Jiangsu funding program for excellent postdoctoral talent

Zitieren

APA

Chen, Z., Li, H., Yu, H., Zhao, Y., Ma, J., Zhang, C., & Zhang, H. (2024). Designing of Airspeed Measurement Method for UAVs Based on MEMS Pressure Sensors. Sensors, 24(17), 5853. https://doi.org/10.3390/s24175853

Vancouver

Chen Z, Li H, Yu H, Zhao Y, Ma J, Zhang C, et al. Designing of Airspeed Measurement Method for UAVs Based on MEMS Pressure Sensors. Sensors. 2024;24(17):5853. doi:10.3390/s24175853

BibTeX
@article{Chen2024,
  author = {Chen, Zhipeng and Li, Haojie and Yu, Hang and Zhao, Yuan and Ma, Jing and Zhang, Chuanhao and Zhang, He},
  title = {Designing of Airspeed Measurement Method for UAVs Based on MEMS Pressure Sensors},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {17},
  pages = {5853},
  doi = {10.3390/s24175853}
}
Kostenlos starten →