Implementing Autonomous Control in the Digital-Twins-Based Internet of Robotic Things for Remote Patient Monitoring
Sensors · 09.09.2024 · 24 (17) · 5840
DOI: 10.3390/s24175840 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 09.09.2024. Verfasst von Sangeen Khan und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of CS and IT, University of Malakand, Chakdara 18800, Pakistan. Hauptthemen laut MEDLINE: Internet of Things, Robotics. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Salman center For Disability Research.
Abstract (Originalsprache)
Conventional patient monitoring methods require skin-to-skin contact, continuous observation, and long working shifts, causing physical and mental stress for medical professionals. Remote patient monitoring (RPM) assists healthcare workers in monitoring patients distantly using various wearable sensors, reducing stress and infection risk. RPM can be enabled by using the Digital Twins (DTs)-based Internet of Robotic Things (IoRT) that merges robotics with the Internet of Things (IoT) and creates a virtual twin (VT) that acquires sensor data from the physical twin (PT) during operation to reflect its behavior. However, manual navigation of PT causes cognitive fatigue for the operator, affecting trust dynamics, satisfaction, and task performance. Also, operating manual systems requires proper training and long-term experience. This research implements autonomous control in the DTs-based IoRT to remotely monitor patients with chronic or contagious diseases. This work extends our previous paper that required the user to manually operate the PT using its VT to collect patient data for medical inspection. The proposed decision-making algorithm enables the PT to autonomously navigate towards the patient’s room, collect and transmit health data, and return to the base station while avoiding various obstacles. Rather than manually navigating, the medical personnel direct the PT to a specific target position using the Menu buttons. The medical staff can monitor the PT and the received sensor information in the pre-built virtual environment (VE). Based on the operator’s preference, manual control of the PT is also achievable. The experimental outcomes and comparative analysis verify the efficiency of the proposed system.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of CS and IT, University of Malakand, Chakdara 18800, Pakistan.
- Department of Software Engineering, University of Malakand, Chakdara 18800, Pakistan.
- Department of Health Informatics, College of Applied Medical Sciences, Qassim University, Buraydah 51452, Saudi Arabia.
- Department of Computer Science, Texas Tech University, Lubbock, TX 79409, USA.
ORCID-Profile: Sangeen Khan, Sulaiman Almutairi, Sulaiman Aftan
Förderung
- King Salman center For Disability Research
Zitieren
APA
Khan, S., Ullah, S., Ullah, K., Almutairi, S., & Aftan, S. (2024). Implementing Autonomous Control in the Digital-Twins-Based Internet of Robotic Things for Remote Patient Monitoring. Sensors, 24(17), 5840. https://doi.org/10.3390/s24175840
Vancouver
Khan S, Ullah S, Ullah K, Almutairi S, Aftan S. Implementing Autonomous Control in the Digital-Twins-Based Internet of Robotic Things for Remote Patient Monitoring. Sensors. 2024;24(17):5840. doi:10.3390/s24175840
BibTeX
@article{Khan2024,
author = {Khan, Sangeen and Ullah, Sehat and Ullah, Khalil and Almutairi, Sulaiman and Aftan, Sulaiman},
title = {Implementing Autonomous Control in the Digital-Twins-Based Internet of Robotic Things for Remote Patient Monitoring},
journal = {Sensors},
year = {2024},
volume = {24},
number = {17},
pages = {5840},
doi = {10.3390/s24175840}
}
EUVIMED