Design and Evaluation of a Novel Venturi-Based Spirometer for Home Respiratory Monitoring
Sensors · 2024
DOI: 10.3390/s24175622 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2024. Verfasst von Mariana Ferreira Nunes und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bioengineering, Instituto Superior Técnico, University of Lisbon, 1949-001 Lisbon, Portugal. Hauptthemen laut MEDLINE: Spirometry, Equipment Design. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EU funds, Active Assisted Living Programme, FCT/MCTES.
Abstract (Originalsprache)
The high cost and limited availability of home spirometers pose a significant barrier to effective respiratory disease management and monitoring. To address this challenge, this paper introduces a novel Venturi-based spirometer designed for home use, leveraging the Bernoulli principle. The device features a 3D-printed Venturi tube that narrows to create a pressure differential, which is measured by a differential pressure sensor and converted into airflow rate. The airflow is then integrated over time to calculate parameters such as the Forced Vital Capacity (FVC) and Forced Expiratory Volume in one second (FEV1). The system also includes a bacterial filter for hygienic use and a circuit board for data acquisition and streaming. Evaluation with eight healthy individuals demonstrated excellent test-retest reliability, with intraclass correlation coefficients (ICCs) of 0.955 for FVC and 0.853 for FEV1. Furthermore, when compared to standard Pulmonary Function Test (PFT) equipment, the spirometer exhibited strong correlation, with Pearson correlation coefficients of 0.992 for FVC and 0.968 for FEV1, and high reliability, with ICCs of 0.987 for FVC and 0.907 for FEV1. These findings suggest that the Venturi-based spirometer could significantly enhance access to spirometry at home. However, further large-scale validation and reliability studies are necessary to confirm its efficacy and reliability for widespread use.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Bioengineering, Instituto Superior Técnico, University of Lisbon, 1949-001 Lisbon, Portugal.
- IT-Instituto de Telecomunicações, Instituto Superior Técnico, 1949-001 Lisbon, Portugal.
- LUMLIS-Lisbon Unit for Learning and Intelligent Systems, 1049-001 Lisbon, Portugal.
- Pulmonology Department, Santa Maria Local Health Unit, 1769-001 Lisbon, Portugal.
- Cardiopneumology Teaching Department, Higher School of Health of The Portuguese Red Cross, 1300-125 Lisbon, Portugal.
- Institute of Environmnetal Health, Lisbon Medical School, Lisbon University, 1649-026 Lisbon, Portugal.
ORCID-Profile: Mariana Ferreira Nunes, Hugo Plácido da Silva, Fátima Rodrigues
Förderung
- EU funds
- Active Assisted Living Programme
- FCT/MCTES
- Active Assisted Living Programme Collaborative Project
Zitieren
APA
Ferreira Nunes, M., Plácido da Silva, H., Raposo, L., & Rodrigues, F. (2024). Design and Evaluation of a Novel Venturi-Based Spirometer for Home Respiratory Monitoring. Sensors. https://doi.org/10.3390/s24175622
Vancouver
Ferreira Nunes M, Plácido da Silva H, Raposo L, Rodrigues F. Design and Evaluation of a Novel Venturi-Based Spirometer for Home Respiratory Monitoring. Sensors. 2024. doi:10.3390/s24175622
BibTeX
@article{FerreiraNunes2024,
author = {Ferreira Nunes, Mariana and Plácido da Silva, Hugo and Raposo, Liliana and Rodrigues, Fátima},
title = {Design and Evaluation of a Novel Venturi-Based Spirometer for Home Respiratory Monitoring},
journal = {Sensors},
year = {2024},
doi = {10.3390/s24175622}
}
EUVIMED