Exploring Piezoelectric Actuation towards Its Applications in Laser Powder Bed Fusion Additive Manufacturing
Sensors · 07.06.2024 · 24 (12) · 3704
DOI: 10.3390/s24123704 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 07.06.2024. Verfasst von Connor Griffin und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NASA.
Abstract (Originalsprache)
Piezoelectric materials, which exhibit a charge distribution across the surfaces in reaction to mechanical strain, find significant utility in actuation and sensing applications. Apart from actuation applications like acoustic devices, motors, and vibration damping, an emerging domain for ultrasonic actuators lies in additive manufacturing processes. Ultrasonic waves applied during solidification aim to modulate grain structure and minimize defects. This research focuses on a fixture designed to facilitate and optimize ultrasonic wave propagation through the build plate in laser powder bed fusion additive manufacturing by utilizing a piezoelectric transducer. Three implementations of piezoelectric transducers were evaluated based on their out-of-plane ultrasonic velocity transmissions. It was determined that a thin plate adhered to the surface of the piezoelectric transducer yielded the most favorable outcomes for implementation, achieving 100% transmission of velocity and energy. Preliminary analysis of melt pool morphology and defects in single-track laser scanning experiments demonstrated the impact of ultrasound on solidification, hinting at a novel approach to enhancing the printability of alloys in laser powder bed fusion additive manufacturing processes. The optimal fixture and the explored transducing efficiency could further guide advanced ultrasound testing to enable in situ defect and texture detection during the additive manufacturing processes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA.
ORCID-Profile: Hanfei Mei, Sivaji Karna, Tianyu Zhang, Victor Giurgiutiu, Lang Yuan
Förderung
- NASA
Zitieren
APA
Griffin, C., Mei, H., Karna, S., Zhang, T., Giurgiutiu, V., & Yuan, L. (2024). Exploring Piezoelectric Actuation towards Its Applications in Laser Powder Bed Fusion Additive Manufacturing. Sensors, 24(12), 3704. https://doi.org/10.3390/s24123704
Vancouver
Griffin C, Mei H, Karna S, Zhang T, Giurgiutiu V, Yuan L. Exploring Piezoelectric Actuation towards Its Applications in Laser Powder Bed Fusion Additive Manufacturing. Sensors. 2024;24(12):3704. doi:10.3390/s24123704
BibTeX
@article{Griffin2024,
author = {Griffin, Connor and Mei, Hanfei and Karna, Sivaji and Zhang, Tianyu and Giurgiutiu, Victor and Yuan, Lang},
title = {Exploring Piezoelectric Actuation towards Its Applications in Laser Powder Bed Fusion Additive Manufacturing},
journal = {Sensors},
year = {2024},
volume = {24},
number = {12},
pages = {3704},
doi = {10.3390/s24123704}
}
EUVIMED