EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Quality Enhancement of Laser Powder‐Bed Fusion Parts by Acoustically Assisted Additive Manufacturing by Laser Powder‐Bed Fusion and its Application to Lattice Structures

Oliver Maurer, Dirk Bähre

Advanced Engineering Materials · 2025-10 · 27 (20)

DOI: 10.1002/adem.202500318 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 11.06.2025. Verfasst von Oliver Maurer und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing technologies such as laser powder‐bed fusion (L‐PBF) offer great freedom in design, ultralightweight optimization of components, and individualization of products down to a batch size of one. However, parts fabricated from L‐PBF suffer from poor quality. Unavoidable porosity, rough surfaces, anisotropic microstructure, and poor geometrical accuracy and their large scatter pose challenges to post‐processing, force larger tolerances, or inhibit technical applications. Acoustic assistance during a build job compacts the powder‐bed and has an influence on solidification. This is why the technology addresses all the aforementioned drawbacks. It is known that porosity, surface roughness in downskin regions, and microstructural anisotropy decrease without any post‐processing if a build job is sonicated. This study focuses on the fabrication of lattice structures by acoustically assisted L‐PBF. Even with a parameter set that is not adjusted to thin‐walled structures, porosity decreases in the as‐built state. Quasistatic compression tests as well as compressive load increase tests are performed. Results show superior mechanical properties of acoustically assisted samples if compared to standard samples.

Zitieren

APA

Maurer, O., & Bähre, D. (2025). Quality Enhancement of Laser Powder‐Bed Fusion Parts by Acoustically Assisted Additive Manufacturing by Laser Powder‐Bed Fusion and its Application to Lattice Structures. Advanced Engineering Materials, 27(20). https://doi.org/10.1002/adem.202500318

Vancouver

Maurer O, Bähre D. Quality Enhancement of Laser Powder‐Bed Fusion Parts by Acoustically Assisted Additive Manufacturing by Laser Powder‐Bed Fusion and its Application to Lattice Structures. Advanced Engineering Materials. 2025;27(20). doi:10.1002/adem.202500318

BibTeX
@article{Maurer2025,
  author = {Maurer, Oliver and Bähre, Dirk},
  title = {Quality Enhancement of Laser Powder‐Bed Fusion Parts by Acoustically Assisted Additive Manufacturing by Laser Powder‐Bed Fusion and its Application to Lattice Structures},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {20},
  doi = {10.1002/adem.202500318}
}
Kostenlos starten →