EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Full-Scale Modeling and FBGs Experimental Measurements for Thermal Analysis of Converter Transformer

Fan Yang, Sance Gao, Gepeng Wang, Hanxue Hao, Pengbo Wang

Sensors · 12.05.2024 · 24 (10) · 3071

DOI: 10.3390/s24103071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 12.05.2024. Verfasst von Fan Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Power Transmission Equipment Technology, School of Electrical Engineering, Chongqing University, Chongqing 400044, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology of the People's Republic of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As the imbalance between power demand and load capacity in electrical systems becomes increasingly severe, investigating the temperature variations in transformers under different load stresses is crucial for ensuring their safe operation. The thermal analysis of converter transformers poses challenges due to the complexity of model construction. This paper develops a full-scale model of a converter transformer using a multi-core high-performance computer and explores its thermal state at 80%, 100%, and 120% loading ratios using the COUPLED iteration method. Additionally, to validate the simulation model, 24 FBGs are installed in the experimental transformer to record the temperature data. The results indicate a general upward trend in winding the temperature from bottom to top. However, an internal temperature rise followed by a decrease is observed within certain sections. Moreover, as the loading ratio increases, both the peak temperature and temperature differential of the transformer windings rise, reaching a peak temperature of 107.9 °C at a 120% loading ratio. The maximum discrepancy between the simulation and experimental results does not exceed 3.5%, providing effective guidance for the transformer design and operational maintenance.

Schlagwörter

Stichwörter der Autor:innen

full-scaleloading ratiomultiphysics coupledtemperature characteristictransformer

Autor:innen und Institutionen

  • State Key Laboratory of Power Transmission Equipment Technology, School of Electrical Engineering, Chongqing University, Chongqing 400044, China.
  • Xi'an XD Transformer Co., Ltd., Xi'an 710077, China.

Förderung

  • Ministry of Science and Technology of the People's Republic of China
  • National Key Research and Development Program of China

Zitieren

APA

Yang, F., Gao, S., Wang, G., Hao, H., & Wang, P. (2024). Full-Scale Modeling and FBGs Experimental Measurements for Thermal Analysis of Converter Transformer. Sensors, 24(10), 3071. https://doi.org/10.3390/s24103071

Vancouver

Yang F, Gao S, Wang G, Hao H, Wang P. Full-Scale Modeling and FBGs Experimental Measurements for Thermal Analysis of Converter Transformer. Sensors. 2024;24(10):3071. doi:10.3390/s24103071

BibTeX
@article{Yang2024,
  author = {Yang, Fan and Gao, Sance and Wang, Gepeng and Hao, Hanxue and Wang, Pengbo},
  title = {Full-Scale Modeling and FBGs Experimental Measurements for Thermal Analysis of Converter Transformer},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {10},
  pages = {3071},
  doi = {10.3390/s24103071}
}
Kostenlos starten →