EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coupled Electromagnetic–Thermal Modeling of HTS Transformer Inrush Current: Experimental Validation and Thermal Analysis

Grzegorz Komarzyniec, Łukasz Stępień, Zbigniew Łagodowski

Energies · 15.11.2025 · 18 (22) · 5993

DOI: 10.3390/en18225993 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 15.11.2025. Verfasst von Grzegorz Komarzyniec und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lublin University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article presents a numerical model of a high-temperature superconducting (HTS) transformer rated at 13.8 kVA, equipped with windings made of 2G ReBCO tapes. The model was developed to analyze the coupled electromagnetic and thermal phenomena occurring during the inrush current period of transformer energization. It describes the dynamic processes of critical current exceedance, resistive zone formation, and local temperature rise within the superconducting tape structure under realistic operating conditions. The geometry of the ReBCO tape is represented with its active superconducting layer and metallic stabilizer layers. Temperature-dependent material properties of each layer, such as electrical resistivity, thermal conductivity, and specific heat capacity, are incorporated into the model. This approach enables a detailed analysis of the temperature distribution across all layers of the superconducting tape. The results indicate that the highest thermal stress occurs during the first inrush current peak, whose amplitude exceeds the critical current of the winding. At this stage, a distinct temperature rise is observed in the stabilizer layers, followed by gradual cooling in subsequent cycles of operation. The simulated current and temperature waveforms show good agreement with experimental measurements performed on a liquid-nitrogen-cooled transformer prototype. The developed model enables quantitative evaluation of local overheating risks, analysis of Joule loss distribution, and assessment of the influence of supply parameters and circuit impedance on the thermal stability of the system. Its application supports the optimization of HTS transformer design and provides valuable insight into the reliability of superconducting windings under transient inrush current conditions.

Förderung

  • Lublin University of Technology

Zitieren

APA

Komarzyniec, G., Stępień, Ł., & Łagodowski, Z. (2025). Coupled Electromagnetic–Thermal Modeling of HTS Transformer Inrush Current: Experimental Validation and Thermal Analysis. Energies, 18(22), 5993. https://doi.org/10.3390/en18225993

Vancouver

Komarzyniec G, Stępień Ł, Łagodowski Z. Coupled Electromagnetic–Thermal Modeling of HTS Transformer Inrush Current: Experimental Validation and Thermal Analysis. Energies. 2025;18(22):5993. doi:10.3390/en18225993

BibTeX
@article{Komarzyniec2025,
  author = {Komarzyniec, Grzegorz and Stępień, Łukasz and Łagodowski, Zbigniew},
  title = {Coupled Electromagnetic–Thermal Modeling of HTS Transformer Inrush Current: Experimental Validation and Thermal Analysis},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {22},
  pages = {5993},
  doi = {10.3390/en18225993}
}
Kostenlos starten →