An Intelligent Thermal Compensation System Using Edge Computing for Machine Tools
Sensors · 15.04.2024 · 24 (8) · 2531
DOI: 10.3390/s24082531 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 15.04.2024. Verfasst von Endah Kristiani und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Computer Science, Tunghai University, Taichung City 407224, Taiwan. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council (NSTC), Taiwan.
Abstract (Originalsprache)
This paper focuses on the use of smart manufacturing in lathe-cutting tool machines, which can experience thermal deformation during long-term processing, leading to displacement errors in the cutting head and damage to the final product. This study uses time-series thermal compensation to develop a predictive system for thermal displacement in machine tools, which is applicable in the industry using edge computing technology. Two experiments were carried out to optimize the temperature prediction models and predict the displacement of five axes at the temperature points. First, an examination is conducted to determine possible variances in time-series data. This analysis is based on the data obtained for the changes in time, speed, torque, and temperature at various locations of the machine tool. Using the viable machine-learning models determined, the study then examines various cutting settings, temperature points, and machine speeds to forecast the future five-axis displacement. Second, to verify the precision of the models created in the initial phase, other time-series models are examined and trained in the subsequent phase, and their effectiveness is compared to the models acquired in the first phase. This work also included training seven models of WNN, LSTNet, TPA-LSTM, XGBoost, BiLSTM, CNN, and GA-LSTM. The study found that the GA-LSTM model outperforms the other three best models of the LSTM, GRU, and XGBoost models with an average precision greater than 90%. Based on the analysis of training time and model precision, the study concluded that a system using LSTM, GRU, and XGBoost should be designed and applied for thermal compensation using edge devices such as the Raspberry Pi.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Computer Science, Tunghai University, Taichung City 407224, Taiwan.
- Department of Informatics, Krida Wacana Christian University, Jakarta 11470, Indonesia.
- Industrial Technology Research Institute, Hsinchu 310401, Taiwan.
- Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung City 411030, Taiwan.
- Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung City 407224, Taiwan.
ORCID-Profile: Endah Kristiani, Jung-Chun Liu, Cheng-Kai Huang, Chao-Tung Yang
Förderung
- National Science and Technology Council (NSTC), Taiwan
Zitieren
APA
Kristiani, E., Wang, L. Y., Liu, J. C., Huang, C. K., Wei, S. J., & Yang, C. T. (2024). An Intelligent Thermal Compensation System Using Edge Computing for Machine Tools. Sensors, 24(8), 2531. https://doi.org/10.3390/s24082531
Vancouver
Kristiani E, Wang LY, Liu JC, Huang CK, Wei SJ, Yang CT. An Intelligent Thermal Compensation System Using Edge Computing for Machine Tools. Sensors. 2024;24(8):2531. doi:10.3390/s24082531
BibTeX
@article{Kristiani2024,
author = {Kristiani, Endah and Wang, Lu-Yan and Liu, Jung-Chun and Huang, Cheng-Kai and Wei, Shih-Jie and Yang, Chao-Tung},
title = {An Intelligent Thermal Compensation System Using Edge Computing for Machine Tools},
journal = {Sensors},
year = {2024},
volume = {24},
number = {8},
pages = {2531},
doi = {10.3390/s24082531}
}
EUVIMED