EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Digital Twin for Volumetric Thermal Error Compensation of Large Machine Tools

Beñat Iñigo iD, Natalia Colinas-Armijo iD, Luis Norberto López de Lacalle iD, Gorka Aguirre iD

Sensors · 25.09.2024 · 24 (19) · 6196

DOI: 10.3390/s24196196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.09.2024. Verfasst von Beñat Iñigo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Design and Precision Engineering, IDEKO, 20870 Elgoibar, Spain. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machine tool accuracy is greatly influenced by geometric and thermal errors that cause positioning deviations within its working volume. Conventionally, these two error sources are treated separately, with distinct procedures employed for their characterization and correction. This research proposes a unified volumetric error compensation approach in terms of a calibration procedure and error compensation model, which considers geometric and thermal errors as a single error source that exhibits temporal variation primarily due to changes in the machine’s thermal state. Building upon previous works that introduced a fully automated volumetric calibration procedure capable of characterizing the variation in volumetric error over time, this study extends this methodology, incorporating multiple temperature sensors distributed throughout the machine and generating a digital twin based on a volumetric error compensation model capable of predicting and compensating for the volumetric error over time at any point in the workspace, using temperature measurements and axis positions as inputs. This methodology is applied to a medium-sized milling machine tool. The digital twin is trained and validated on volumetric calibration tests, wherein various controlled heat sources are employed to induce thermal variations while measuring the temperatures in the machine.

Schlagwörter

Stichwörter der Autor:innen

calibrationdigital twinmachine toolthermal compensationvolumetric error

Autor:innen und Institutionen

  • Design and Precision Engineering, IDEKO, 20870 Elgoibar, Spain.
  • Department of Mechanical Engineering, University of the Basque Country (UPV/EHU), 48013 Bilbao, Spain.

ORCID-Profile: Beñat Iñigo, Natalia Colinas-Armijo, Luis Norberto López de Lacalle, Gorka Aguirre

Förderung

  • Agencia Estatal de Investigación

Zitieren

APA

Iñigo, B., Colinas-Armijo, N., López de Lacalle, L. N., & Aguirre, G. (2024). Digital Twin for Volumetric Thermal Error Compensation of Large Machine Tools. Sensors, 24(19), 6196. https://doi.org/10.3390/s24196196

Vancouver

Iñigo B, Colinas-Armijo N, López de Lacalle LN, Aguirre G. Digital Twin for Volumetric Thermal Error Compensation of Large Machine Tools. Sensors. 2024;24(19):6196. doi:10.3390/s24196196

BibTeX
@article{Iigo2024,
  author = {Iñigo, Beñat and Colinas-Armijo, Natalia and López de Lacalle, Luis Norberto and Aguirre, Gorka},
  title = {Digital Twin for Volumetric Thermal Error Compensation of Large Machine Tools},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {19},
  pages = {6196},
  doi = {10.3390/s24196196}
}
Kostenlos starten →