EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Three-Dimensional Deformation Monitoring Method: Combining Optical Deformation Monitoring Based on Regression Models and GB-SAR Interferometry

Yanbo Cheng iD, Yuanhui Mo iD, Haifeng Huang, Tao Lai iD

Sensors · 08.03.2024 · 24 (6) · 1754

DOI: 10.3390/s24061754 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 08.03.2024. Verfasst von Yanbo Cheng und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronics and Communication Engineering, Shenzhen Campus, Sun Yat-sen University, Shenzhen 518107, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Areas of R&D Projects in Guangdong Province, the introduced innovative R&D team project of "The Pearl River Talent Recruitment Program", the Shenzhen Science Technology Planning Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces a method for quantifying the three-dimensional deformation of ground targets and outlines the associated process. Initially, ground-based synthetic aperture radar was employed to monitor the radial deformation of targets, and optical equipment monitored pixel-level deformation in the vertical plane of the line of sight. Subsequently, a regression model was established to transform pixel-level deformation into two-dimensional deformation based on a fundamental length unit, and the radar deformation monitoring data were merged with the optical deformation monitoring data. Finally, the fused data underwent deformation, resulting in a comprehensive three-dimensional deformation profile of the target. Through physical data acquisition experiments, the comprehensive three-dimensional deformation of targets was obtained and compared with the actual deformations. The experimental results show that the method has a relative error of less than 10%, and monitoring accuracy is achieved at the millimeter level.

Schlagwörter

Stichwörter der Autor:innen

fusion dataground-based synthetic aperture radarregression modelthree-dimensional deformation

Autor:innen und Institutionen

  • School of Electronics and Communication Engineering, Shenzhen Campus, Sun Yat-sen University, Shenzhen 518107, China.

ORCID-Profile: Yanbo Cheng, Yuanhui Mo, Tao Lai

Förderung

  • Key Areas of R&D Projects in Guangdong Province
  • the introduced innovative R&D team project of "The Pearl River Talent Recruitment Program"
  • the Shenzhen Science Technology Planning Project
  • the Natural Science Foundation of China
  • Key Areas of R&D Projects in Guangdong Province
  • introduced innovative R&D team project of “The Pearl River Talent Recruitment Program”
  • Shenzhen Science Technology Planning Project
  • Natural Science Foundation of China

Zitieren

APA

Cheng, Y., Mo, Y., Huang, H., & Lai, T. (2024). A Three-Dimensional Deformation Monitoring Method: Combining Optical Deformation Monitoring Based on Regression Models and GB-SAR Interferometry. Sensors, 24(6), 1754. https://doi.org/10.3390/s24061754

Vancouver

Cheng Y, Mo Y, Huang H, Lai T. A Three-Dimensional Deformation Monitoring Method: Combining Optical Deformation Monitoring Based on Regression Models and GB-SAR Interferometry. Sensors. 2024;24(6):1754. doi:10.3390/s24061754

BibTeX
@article{Cheng2024,
  author = {Cheng, Yanbo and Mo, Yuanhui and Huang, Haifeng and Lai, Tao},
  title = {A Three-Dimensional Deformation Monitoring Method: Combining Optical Deformation Monitoring Based on Regression Models and GB-SAR Interferometry},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {6},
  pages = {1754},
  doi = {10.3390/s24061754}
}
Kostenlos starten →