Multi-Baseline Bistatic SAR Three-Dimensional Imaging Method Based on Phase Error Calibration Combining PGA and EB-ISOA
Remote Sensing · 22.01.2025 · 17 (3) · 363
DOI: 10.3390/rs17030363 ↗Kurz gefasst
Fachartikel in der Zeitschrift Remote Sensing, online erschienen am 22.01.2025. Verfasst von Jinfeng He und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, Guangdong Basic and Applied Basic Research Foundation, Fundamental Research Funds for the Central Universities, Sun Yat-sen University.
Abstract (Originalsprache)
Tomographic synthetic aperture radar (TomoSAR) is an advanced three-dimensional (3D) synthetic aperture radar (SAR) imaging technology that can obtain multiple SAR images through multi-track observations, thereby reconstructing the 3D spatial structure of targets. However, due to system limitations, the multi-baseline (MB) monostatic SAR (MonoSAR) encounters temporal decorrelation issues when observing the scene such as forests, affecting the accuracy of the 3D reconstruction. Additionally, during TomoSAR observations, the platform jitter and inaccurate position measurement will contaminate the MB SAR data, which may result in the multiplicative noise with phase errors, thereby leading to the decrease in the imaging quality. To address the above issues, this paper proposes a MB bistatic SAR (BiSAR) 3D imaging method based on the phase error calibration that combines the phase gradient autofocus (PGA) and energy balance intensity-squared optimization autofocus (EB-ISOA). Firstly, the signal model of the MB one-stationary (OS) BiSAR is established and the 3D imaging principle is presented, and then the phase error caused by platform jitter and inaccurate position measurement is analyzed. Moreover, combining the PGA and EB-ISOA methods, a 3D imaging method based on the phase error calibration is proposed. This method can improve the accuracy of phase error calibration, avoid the vertical displacement, and has the noise robustness, which can obtain the high-precision 3D BiSAR imaging results. The experimental results are shown to verify the effectiveness and practicality of the proposed MB BiSAR 3D imaging method.
Förderung
- Shenzhen Science and Technology Program
- Guangdong Basic and Applied Basic Research Foundation
- Fundamental Research Funds for the Central Universities, Sun Yat-sen University
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- Science and Technology Planning Project of Key Laboratory of Advanced IntelliSense Technology, Guangdong Science and Technology Department
Zitieren
APA
He, J., Xie, H., Liu, H., Wu, Z., Xu, B., Zhu, N., Lu, Z., & Qin, P. (2025). Multi-Baseline Bistatic SAR Three-Dimensional Imaging Method Based on Phase Error Calibration Combining PGA and EB-ISOA. Remote Sensing, 17(3), 363. https://doi.org/10.3390/rs17030363
Vancouver
He J, Xie H, Liu H, Wu Z, Xu B, Zhu N, et al. Multi-Baseline Bistatic SAR Three-Dimensional Imaging Method Based on Phase Error Calibration Combining PGA and EB-ISOA. Remote Sensing. 2025;17(3):363. doi:10.3390/rs17030363
BibTeX
@article{He2025,
author = {He, Jinfeng and Xie, Hongtu and Liu, Haozong and Wu, Zhitao and Xu, Bin and Zhu, Nannan and Lu, Zheng and Qin, Pengcheng},
title = {Multi-Baseline Bistatic SAR Three-Dimensional Imaging Method Based on Phase Error Calibration Combining PGA and EB-ISOA},
journal = {Remote Sensing},
year = {2025},
volume = {17},
number = {3},
pages = {363},
doi = {10.3390/rs17030363}
}
EUVIMED